Drill Bit MODECO SDS+ 14 mm (MN-61-928) for rotary hammers and hammer drills

MODECO SDS+ 14 mm drill bit (for rotary hammers and hammer drills) is made for drilling medium-diameter holes in concrete, brick and masonry. The SDS+ shank ensures fast insertion and secure locking in compatible rotary hammers and hammer drills, allowing stable, centered drilling under impact load. The 14 mm diameter provides a balance between hole size and drilling speed for common installation and construction tasks.

Advantages

The SDS+ shank design allows quick tool engagement and reduces the risk of slippage during hammering. The bit’s geometry is optimized for effective dust removal and efficient percussion drilling in hard substrates. Its 14 mm diameter offers versatility for anchor bolts, dowels and electrical or plumbing penetrations where medium holes are required. The construction provides consistent drilling performance with standard rotary hammer settings.

Suitable for

• Drilling holes for anchors and dowels in concrete and brick
• Creating passages for electrical conduits and plumbing lines
• Renovation and installation work on masonry walls
• General construction tasks requiring medium-diameter holes

Key specifications

• Shank type: SDS+
• Drill diameter: 14 mm
• Compatible tools: SDS+ rotary hammers and hammer drills
• Primary materials: concrete, brick, masonry
• Intended use: percussion (hammer) drilling

How to use

Securely insert the SDS+ shank into the compatible rotary hammer chuck until it locks. Select an appropriate hammer or rotary-hammer mode and set the drill to the recommended rotation and impact settings for masonry. Start drilling with moderate axial pressure, allowing the tool’s percussion action to advance the bit; periodically withdraw the bit to clear dust and debris and reduce heat build-up. For through-holes or deep holes, remove accumulated dust with a blow or vacuum to maintain cutting efficiency.

Usage recommendations

Use personal protective equipment such as safety glasses, hearing protection and a dust mask when drilling masonry. Match drill speed and impact force to the substrate hardness; avoid excessive lateral force to prevent bit breakage. Replace the bit when wear degrades cutting performance or centering ability.