Drill bit MODECO SDS+ 16 mm MN-61-932

MODECO SDS+ 16 mm drill bit is a rotary hammer accessory designed for drilling into masonry, concrete, brick and similar construction materials. With a 16 mm cutting diameter and an SDS+ shank, this drill bit fits SDS+ rotary hammers and is intended for medium-duty demolition and installation tasks such as creating holes for anchors, dowels and conduits.

Advantages

The carbide tip and flute geometry provide efficient material removal and extended service life under typical construction use. The SDS+ shank ensures secure tool-to-bit engagement and quick changes without additional tools. Balanced design reduces wobble during drilling and improves accuracy for consistent hole diameter in concrete and masonry.

Suitable for

• Drilling anchor and dowel holes in concrete and brick
• Making conduit and pipe entry holes in masonry
• Medium-duty installation and renovation tasks
• Work with SDS+ rotary hammers on construction sites

Key specifications

• Nominal diameter: 16 mm
• Shank type: SDS+ compatible
• Intended materials: concrete, masonry, brick
• Application: rotary hammer drilling for anchors, dowels and conduits

How to use

Fit the drill bit into the SDS+ chuck of a compatible rotary hammer until it locks. Select the hammer drilling mode and set an appropriate impact and rotation speed for the material. Position the bit on the marked drilling point, start drilling with steady pressure and allow the tool to do the work; avoid excessive lateral forces. Withdraw periodically to clear dust from the hole when drilling deeper. After use, retract the bit, clean debris from the flutes and store it in a dry place.

Usage recommendations

Wear appropriate personal protective equipment such as safety glasses, hearing protection and dust mask when drilling. Match the drill speed and hammer setting to the hardness of the material; use water cooling only if recommended by the rotary hammer manufacturer. Inspect the bit before use for wear or damage and replace when tip performance declines to maintain drilling accuracy.