Circular Saw Blade MODECO 450x30 mm 60 T MN-65-870 for Wood

The MODECO circular saw blade 450x30 mm with 60 teeth is designed for cutting wood on table saws and stationary circular saws that accept a 30 mm bore and the blade's diameter. The blade’s geometry and tooth count provide smoother cuts and reduced tearing, making it suitable for both rip and cross cuts in timber, panels and boards. This blade is intended for use at the appropriate machine speed and clamping arrangements to ensure stable, accurate cutting and long-lasting performance.

Advantages

The 60-tooth configuration yields fine, clean cutting results with less chipping on the cut edges compared with coarser blades. A 450 mm diameter allows deep cutting capacity on standard stationary saw tables, while the 30 mm bore matches machines designed for that arbor size. The construction balances cutting precision and durability, delivering consistent performance in repeated use when recommended feed rates and machine settings are observed.

Suitable for

• Ripping and crosscutting softwood and hardwood boards
• Cutting veneered panels, plywood and MDF
• Use on table saws and stationary circular saws with 30 mm arbor
• Application where reduced tear-out and smoother finishes are required

Key specifications

• Blade diameter: 450 mm
• Bore diameter: 30 mm
• Number of teeth: 60
• Material type: designed for wood cutting (carbide tipped or similar tooth material typical for wood blades)
• Typical maximum cutting depth compatible with 450 mm diameter blades when used on full-size stationary saws

How to use

Install the blade on a compatible table saw or stationary circular saw with a 30 mm arbor, ensuring the saw is disconnected from power during fitting. Verify the blade rotation direction matches the saw’s indicated rotation, tighten the arbor flange to the manufacturer’s torque recommendation, and set blade height for the required cut depth. Use appropriate feed speed, support the workpiece firmly, and apply consistent feed pressure while keeping hands clear of the blade path. Observe safety guards, hearing and eye protection, and replace or service the blade if excessive vibration, chipping, or poor cutting quality appears.

Usage recommendations

For best results when cutting wood and wood-based panels, use a steady feed rate suited to the timber species and thickness, avoid excessive lateral pressure, and keep the blade clean from resin build-up. Match the saw’s RPM to the blade’s recommended operating speed range, and check blade alignment and sharpness regularly to maintain smooth, accurate cuts.