Belt Sanding Roll MODECO MN-68-462/5 75×533 mm grit 60, set of 5

Set of five MODECO belt sanding rolls sized 75×533 mm with 60-grit abrasive, designed as replacement endless belts for compatible belt sanders. These sanding rolls are intended for medium-to-coarse material removal and surface preparation tasks on wood, painted surfaces and soft metals. Supplied as a set of five, they allow uninterrupted workflow during renovation, carpentry and general workshop work where aggressive sanding and leveling are required.

Advantages

The 60-grit abrasive provides a balance between stock removal rate and surface finish, allowing efficient smoothing and leveling without excessive loading. Each roll is manufactured to uniform dimensions for consistent tracking on belt sanders that accept 75×533 mm belts. Sold in a set of five, the rolls reduce downtime by providing ready replacements. The abrasive composition and backing are selected for durability during use on common workshop materials.

Suitable for

• Removing old paint and varnish from wooden surfaces
• Shaping and leveling raw wood and timber
• Deburring and smoothing soft metals and aluminium
• Preparing surfaces for subsequent finer sanding or finishing
• General renovation and carpentry workshop tasks

Key specifications

• Dimensions: 75 × 533 mm (width × circumference)
• Abrasive grit: 60 (medium-coarse)
• Pack quantity: 5 belt rolls
• Type: endless belt suitable for belt sanders accepting 75×533 mm belts
• Typical materials: wood, painted/coated surfaces, soft metals

How to use

Ensure the belt sander is powered off and unplugged before installation. Remove the worn belt according to the sander manufacturer's instructions, fit the 75×533 mm endless belt onto the drive and idler drums, and adjust tracking so the belt runs centrally. Start the sander at low speed if adjustable, then increase to the working speed while monitoring belt tracking and stability. Apply steady, even pressure and move along the workpiece to achieve uniform material removal. Replace belts from the set as abrasive performance diminishes.

Usage recommendations

Use appropriate personal protective equipment such as eye protection, dust mask and hearing protection when sanding. For best results on painted or varnished surfaces, test on a small area first to confirm the grit achieves the desired removal rate without damaging the substrate. Store spare belts in a dry, cool place away from direct sunlight to preserve abrasive life.