Abrasive sanding belt MODECO MN-68-468/5, grit 100, size 457 x 75 mm, pack of 5

Endless abrasive sanding belts MODECO MN-68-468/5, grit 100, size 457 x 75 mm, pack of 5 are abrasive belts designed for use on compatible belt sanders for material removal, leveling and finishing of wood, metal and composite surfaces. The medium-coarse 100 grit offers a balance between efficient stock removal and surface control, making these belts suitable for both rough shaping and intermediate sanding stages. Supplied as a pack of five, the belts are endless to enable continuous operation on standard belt sanding machines.

Advantages

These sanding belts deliver consistent abrasive performance across the belt width and circumference, reducing the need for frequent belt changes. The 100 grit abrasive provides effective cutting action while maintaining an even working surface, which helps achieve uniform results on different substrates. Pack of five ensures spare belts are available to maintain productivity during extended projects.

Suitable for

• Removing paint, rust or old coatings from metal surfaces
• Shaping and stock removal on wood components
• Preparing composite and laminated surfaces for finishing
• Intermediate sanding between coarse and fine grit operations

Key specifications

• Grit size: 100 (medium-coarse)
• Belt dimensions: 457 mm length x 75 mm width
• Endless design for continuous belt sander operation
• Package quantity: 5 belts

How to use

Fit the appropriate belt onto a compatible belt sander following the machine manufacturer's instructions and ensure correct tracking and tension before switching on. Start sanding using moderate pressure and maintain steady movement along the workpiece to avoid creating uneven spots. Replace worn belts from the pack as needed to keep cutting performance consistent; check the workpiece periodically to determine when to progress to a finer grit.

Usage recommendations

Wear appropriate personal protective equipment such as safety glasses, hearing protection and a dust mask. Use dust extraction where possible to reduce airborne particles. Test on a scrap piece to verify match of grit and aggressiveness to the material before working on the final surface.