Sandpaper mesh sheets MODECO MN-68-508 80 grit 50 pcs

MODECO mesh sandpaper sheets MN-68-508 in 80 grit are abrasive sheets designed for sanding and surface preparation on wood, painted surfaces, plaster and metal. The open mesh construction minimizes clogging, improves dust extraction and sustains consistent abrasive performance during both manual and powered sanding operations. Supplied as a pack of 50, these sheets suit repeated use where efficient debris removal and longer abrasive life are required.

Advantages

The open mesh design provides better dust evacuation compared with closed-back paper abrasives, reducing clogging and extending working life. An 80 grit abrasive delivers a balance between material removal rate and surface finish, suitable for shaping, smoothing and preparing substrates for further treatment. Compatibility with both hand sanding and orbital or rotary sanders allows flexible application. The mesh backing promotes faster cleanup and improved visibility of the work surface when used with a dust extraction system.

Suitable for

• Sanding soft and hardwood before finishing
• Removing old paint and rust from metal surfaces
• Leveling plaster and compound
• Preparing surfaces prior to priming and painting
• General-purpose sanding with dust extraction systems

Key specifications

• Abrasive grit: 80 (medium-coarse)
• Sheet type: open mesh abrasive
• Pack quantity: 50 sheets
• Recommended for: manual and compatible powered sanders with dust extraction
• Suitable substrates: wood, painted surfaces, plaster, metal
• Main benefit: reduced clogging and improved dust removal

How to use

Select an 80 grit mesh sheet from the pack and attach it to the compatible sanding pad or tool according to the tool manufacturer's instructions. Use steady, even strokes for manual sanding or run the powered sander with light to moderate pressure to avoid gouging. When removing paint, rust or excess material, work progressively and check the surface frequently. Connect a dust extraction system where available to take advantage of the mesh construction and maintain a cleaner working area. Replace the sheet when abrasive efficiency declines or the mesh is damaged.

Usage recommendations

For best results, use these mesh sandpaper sheets with a dust extractor to maximize debris removal and extend abrasive life. Start with 80 grit for shaping and material removal, then switch to finer grits for smoothing and finishing. Test on a small area when working with delicate or coated surfaces to confirm suitability.