Sandpaper Mesh Sheets MODECO MN-68-510, grit 100, 50 pieces

MODECO mesh sandpaper sheets, grit 100, pack of 50 are designed for sanding and surface preparation on wood, painted surfaces, plaster and similar materials. The open mesh construction allows efficient dust extraction during sanding, reducing clogging and maintaining consistent abrasive action. Sheets are cut to a standard sheet format suitable for hand sanding and compatible with orbital sanders that accept sheet abrasives.

Advantages

The open mesh design improves dust removal and extends the usable life of each sheet compared with traditional closed-back sandpaper. Grit 100 provides a medium-coarse abrasive action suitable for removing material, smoothing rough surfaces and preparing substrates for subsequent finishing. The lightweight, flexible mesh conforms to contours and edges while resisting rapid clogging, which helps maintain performance during prolonged use.

Suitable for

• Sanding and leveling raw or rough wood
• Removing loose paint, smoothing painted surfaces
• Preparing plaster and drywall for finishing
• Hand sanding curved or irregular surfaces
• Use with orbital sanders that accept sheet abrasives

Key specifications

• Abrasive grain: grit 100 (medium-coarse)
• Quantity: 50 sheets per pack
• Construction: open mesh abrasive for improved dust extraction
• Suitable materials: wood, paint, plaster and similar substrates
• Format: sheet type compatible with standard hand sanding and sheet-type orbital sanders

How to use

Select an appropriate sanding block or clamp the sheet in a compatible orbital sander. Begin sanding with even, moderate pressure and move across the surface in a consistent pattern to avoid uneven removal. For hand sanding, fold the sheet over a sanding block to maintain a flat abrasive surface on flat areas and flex the sheet slightly for contours. Replace sheets when abrasive performance diminishes or if mesh becomes clogged with debris that cannot be removed by gentle tapping or air blow-off.

Usage recommendations

For efficient dust control, use the mesh sheets with a vacuum-equipped sander or connect to a dust extraction system when possible. Test on a small area before full application to confirm suitability for the substrate and finish. When preparing surfaces for painting or varnishing, follow progressive grit steps as needed — start with the 100-grit mesh to remove defects, then refine with finer abrasives according to surface requirements.