Wire cup brush MODECO MN-69-173 with 1/4" shank, 75 mm diameter

Modeco Szczotka druciana tarczowa z trzpieniem 1/4" 75mm - MN-69-173 is a 75 mm disc wire brush with a 1/4" (6.35 mm) shank intended for use with drills and rotary tools. Manufactured by MODECO, this wire brush is designed to remove rust, paint, scale and other surface contaminants from metal and hard materials. The compact disc shape and standard shank size make it compatible with handheld drills and rotary tools that accept 1/4" fittings.

Advantages

The disc configuration concentrates abrasive action at the working perimeter for efficient surface cleaning while the 75 mm diameter balances reach and control for small to medium jobs. The 1/4" shank provides straightforward attachment to common drills and rotary tools without adapters. MODECO-made wire gives consistent stiffness and wear characteristics appropriate for mechanical cleaning tasks on ferrous and some non-ferrous metals.

Suitable for

• Removing rust and loose paint from metal surfaces
• Cleaning weld seams and edges
• Preparing metal for painting or welding
• Surface deburring and scale removal on small parts

Key specifications

• Brush type: disc (wheel) wire brush
• Diameter: 75 mm
• Shank size: 1/4" (6.35 mm)
• Wire material: metal wire suitable for mechanical cleaning (steel wire typical for this type)
• Compatibility: designed for handheld drills and rotary tools accepting 1/4" shanks

How to use

Secure the wire brush in the drill chuck, ensuring the 1/4" shank is tightened and centered. Operate the tool at the recommended speed for wire brushes, start at a lower speed to assess brushing effect and gradually increase as needed. Apply light to moderate pressure, keeping the brush flat or at a slight angle to the workpiece to avoid excessive wear or damage. Move the brush steadily across the surface to achieve uniform cleaning. Do not use the brush if wires are significantly worn or loose.

Usage recommendations

Always wear appropriate personal protective equipment: safety goggles, gloves and respiratory protection if dust is generated. Check compatibility of the wire brush with the material to avoid unwanted abrasion on softer surfaces. Replace the brush when wire loss or imbalance is noticeable to maintain safe operation.