Mixer paddle MODECO MN-79-080, universal SDS+ shank, 120x600 mm for adhesives and mortars

MODECO MN-79-080 is a universal mixer paddle with an SDS+ shank and dimensions 120x600 mm, designed for mechanical mixing of adhesives, cement and gypsum mortars, putties and other viscous building materials. The paddle is compatible with drills and mixers that accept SDS+ fittings and is built to provide effective circulation of material while reducing splashing and air entrainment. Its length and blade design support stable mixing in buckets and mixing containers commonly used on construction and renovation sites.

Advantages

The MODECO MN-79-080 offers robust construction and a universal SDS+ shank for quick and secure attachment to compatible power tools. Its 120x600 mm dimensions balance reach and torque requirements, enabling efficient blending of thick adhesives and mortars. The paddle geometry is designed to minimise splashing and promote uniform mixing, reducing the need for manual finishing and rework. Corrosion-resistant finish and solid welds contribute to longer service life under jobsite conditions.

Suitable for

• Mixing tile adhesives and thinset mortars
• Preparing cement and gypsum-based mortars
• Blending putties, fillers and joint compounds
• Mixing thick primers, levelling compounds and viscous coatings

Key specifications

• Shank type: SDS+ compatible
• Paddle dimensions: 120 mm diameter × 600 mm length
• Material: steel construction with protective finish
• Designed for use with mixers and drills that accept SDS+ fittings
• Intended for mixing adhesives, cement and gypsum mortars, putties and viscous compounds

How to use

Insert the SDS+ shank of the MODECO MN-79-080 into a compatible drill or mixing machine and secure according to the tool manufacturer's instructions. Place the paddle into the mixing container and start at low speed to avoid splashing; gradually increase speed until the material is homogeneously blended. Move the paddle gently through the mixture to ensure all material from the container sides and bottom is incorporated. Periodically stop the tool to check consistency and remove any material build-up from the paddle if necessary.

Usage recommendations

Use personal protective equipment such as safety goggles and gloves when mixing. Select a drill or mixer with adequate power and torque for viscous materials to avoid motor overload. Clean the paddle after use to prevent material hardening and store in a dry place to maintain the protective finish.