Drill chuck MODECO CLIK 1/2" 10mm Keyless - MN-97-023

MODECO CLIK keyless drill chuck with 1/2" mounting and 10 mm maximum capacity is designed for quick bit changes on handheld drills and drivers that accept a 1/2" interface. The chuck accommodates common HSS and masonry bits up to 10 mm and allows tool-free tightening and loosening, reducing downtime during repetitive drilling and light fastening operations. Its compact design maintains balance on the drill spindle while providing reliable grip on round and slightly tapered shanks.

Advantages

The keyless mechanism enables fast, one-handed bit changes without a chuck key, improving workflow efficiency. A 1/2" mounting ensures compatibility with standard drill spindles and many adapter interfaces, while the 10 mm capacity covers the majority of everyday drilling tasks. The chuck construction provides a secure grip on bits to minimise slippage and wobble under typical drilling loads. Its compact dimensions preserve tool ergonomics and accessibility in confined spaces.

Suitable for

• Handheld electric drills and cordless drivers with 1/2" mounting
• Home DIY drilling and light fastening tasks
• Workshop tasks requiring frequent bit changes
• Light metal, wood and masonry drilling using appropriate bits up to 10 mm

Key specifications

• Mounting: 1/2" (inch) shank interface compatible with standard drill spindles
• Maximum bit capacity: 10 mm
• Keyless tightening: tool-free operation for inserting and removing bits
• Suitable bit types: straight shank bits, HSS, masonry and screwdriver bits (up to 10 mm)
• Construction: compact metal/plastic composite body for balance and grip

How to use

Insert the drill or driver spindle into the 1/2" mounting and secure according to your tool's instructions. Open the chuck jaws by rotating the outer sleeve counterclockwise, insert the desired bit fully into the jaws, then rotate the sleeve clockwise until the bit is firmly clamped. For best results, tighten the chuck while applying slight axial pressure to seat the bit. Check that the bit runs true before use and re-tighten if necessary.

Usage recommendations

Use bits appropriate for the material and keep the chuck clean from debris and dust to ensure consistent gripping performance. For heavy-duty or high-torque applications use a chuck and drill rated for those loads; this keyless 10 mm chuck is intended for general-purpose drilling and light fastening. Periodically inspect the jaws for wear and replace the chuck if slippage or excessive runout occurs.