Concrete drill bit MODECO SDS+ 6 mm MN61124

MODECO SDS+ 6 mm concrete drill bit (Model MN61124) is designed for use with hammer drills featuring an SDS+ chuck. Built for rotary‑percussion drilling, this 6 mm diameter bit provides accurate, clean holes in concrete, masonry and natural stone. Its geometry and SDS+ shank ensure secure retention and efficient energy transfer from the drill to the cutting tip, making it suitable for common construction and installation tasks such as fixing anchors and dowels.

Advantages

The SDS+ shank enables quick and secure bit changes and stable locking during hammer drilling. The 6 mm diameter offers precision for anchor and dowel applications while minimising unnecessary material removal. The bit is optimised for rotary‑percussion use, delivering consistent drilling speed and reliable performance in hard substrates. The construction balances cutting efficiency and wear resistance to provide dependable results during repetitive drilling operations.

Suitable for

• Drilling precise 6 mm holes in concrete walls and floors
• Installing anchors, dowels and fixings in masonry
• Drilling into natural stone and brickwork
• General construction and renovation tasks requiring rotary‑percussion drilling

Key specifications

• Shank type: SDS+
• Diameter: 6 mm
• Intended use: concrete, masonry, natural stone
• Drilling method: rotary‑percussion (hammer drilling)
• Typical applications: anchor and dowel hole preparation

How to use

Fit the drill bit into an SDS+ chuck until it locks securely. Select an appropriate hammer‑drill setting for rotary‑percussion operation and start drilling at moderate speed, applying steady axial pressure without excessive force. Withdraw the bit periodically to clear dust and debris from the hole and maintain cutting efficiency. For deeper holes, drill in stages and clear the hole between passes to avoid clogging. After use, clean the bit of dust and store it in a dry place to minimise corrosion.

Usage recommendations

Use the MODECO SDS+ 6 mm bit with a drill rated for SDS+ bits and designed for hammer drilling. For optimal hole accuracy for anchors and dowels, mark the drilling point, use a centre punch if needed, and maintain perpendicular alignment. When drilling reinforced concrete, proceed with care and reduce feed pressure if excessive resistance or vibration is encountered.