Drill bit MODECO SDS+ 10 mm MN61143 for concrete

MODECO SDS+ 10 mm drill bit MN61143 is designed for drilling 10 mm diameter holes in concrete and masonry. The bit features an SDS+ shank for secure, quick mounting in compatible rotary hammers and provides the geometry needed for efficient material removal in construction and renovation tasks. It is suitable for creating holes for anchors, dowels and through-holes during installations and repairs.

Advantages

The SDS+ shank ensures fast and reliable tool-to-bit connection, reducing slippage and improving power transfer from the rotary hammer to the cutting head. The 10 mm diameter provides a standard size for many anchor and dowel systems, while the tip geometry and flute design support stable drilling in concrete and masonry. The bit is intended to offer consistent hole diameter and straightness when used with appropriate hammer drills and correct drilling technique.

Suitable for

• Drilling 10 mm holes in concrete for anchors and wall plugs
• Making through-holes in masonry for electrical and plumbing installations
• Renovation and repair tasks that require precise 10 mm holes in hard substrates
• Use with SDS+ compatible rotary hammers for medium-duty drilling

Key specifications

• Diameter: 10 mm
• Shank type: SDS+
• Intended material: concrete and masonry
• Typical application: anchor and dowel hole drilling, through-holes

How to use

Secure the drill bit in an SDS+ compatible rotary hammer according to the tool manufacturer’s instructions. Select an appropriate drilling mode (rotary hammer or hammering mode) and start at low speed to position the bit, then apply steady pressure and increase to working speed. Periodically withdraw the bit to clear dust from the hole and avoid overheating. For deep holes, drill in stages and clear debris between passes. Use appropriate personal protective equipment, including eye and hearing protection, and follow safe handling practices for power tools.

Usage recommendations

Use the 10 mm SDS+ drill bit with a rotary hammer rated for masonry drilling. Match the hole depth and diameter to the anchor or dowel specifications, and maintain steady, moderate pressure without forcing the bit to extend tool life and achieve accurate holes.