Drill bit set MODECO MN61202 SDS+ for concrete, sizes 6, 8, 10, 12 mm

Set of MODECO SDS+ drill bits MN61202 for concrete, including four carbide-tipped bits in diameters 6, 8, 10 and 12 mm with SDS+ shanks. These bits are designed for use with SDS+ rotary hammers and hammer drills to create precise holes in concrete, brick and other masonry materials. The carbide tips and robust flute geometry support effective chiseling action and dust removal during rotary-percussion drilling.

Advantages

Carbide-tipped cutting edges ensure improved wear resistance when drilling into hard masonry surfaces. SDS+ shanks provide fast, secure bit changes and reliable transmission of hammer energy from compatible rotary hammers. The set covers common hole diameters used for anchors, dowels and conduit, reducing the need to purchase individual bits. Optimized flute design helps evacuate dust and debris, maintaining drilling efficiency and reducing bit binding.

Suitable for

• Drilling holes in concrete for anchors and expansion bolts
• Creating openings in brick and block for dowels and fixings
• Preparing routes for electrical conduit and plumbing sleeves
• General construction and renovation drilling tasks with SDS+ rotary hammers

Key specifications

• Tip material: tungsten carbide for increased hardness and wear resistance
• Shank type: SDS+ for compatibility with SDS+ rotary hammers and easy bit changes
• Included diameters: 6 mm, 8 mm, 10 mm, 12 mm
• Suitable materials: concrete, brick, block and common masonry
• Flute design: spiral geometry for dust evacuation and efficient drilling

How to use

Select a drill bit of the required diameter and insert it fully into the SDS+ chuck of a compatible rotary hammer. Use the rotary-percussion (hammer) mode when drilling into concrete or masonry. Start drilling at low speed to seat the bit, then apply steady pressure and increase speed as appropriate for the material. Periodically withdraw the bit to clear accumulated dust from the hole and allow the bit to cool. For through-holes, mark depth on the bit or use a depth stop on the tool.

Usage recommendations

Wear appropriate personal protective equipment, including safety glasses, dust mask and hearing protection. Use a vacuum or dust extraction accessory where possible to reduce airborne particles. Match bit diameter to anchor or dowel specifications to ensure proper fit and load performance.