Cut-off Wheel for Metal MODECO 150 mm MN-65-025

Cut-off Wheel for Metal MODECO 150 mm MN-65-025 is a 150 mm abrasive disc designed for cutting metal workpieces with compatible angle grinders and handheld cutting tools. The wheel is intended for professional and DIY tasks where fast, straight cutting of steel, iron and similar ferrous materials is required. Its size suits many common grinders and provides a balance between cutting depth and maneuverability for workshop and construction use.

Advantages

The MODECO 150 mm cut-off wheel delivers controlled cutting performance with a thin profile that reduces material loss and minimizes heat build-up. It offers consistent abrasive properties for predictable cutting speed and edge quality when used according to tool manufacturer recommendations. The disc is compatible with standard 150 mm grinders, providing straightforward installation and replacement.

Suitable for

• Cutting steel rods, profiles and pipes
• Trimming metal sheets and plates
• On-site construction metal cutting with handheld grinders
• Workshop fabrication and maintenance tasks

Key specifications

• Diameter: 150 mm
• Intended material: ferrous metals (steel, iron)
• Disc type: cut-off / abrasive cutting wheel
• Typical mounting: fits angle grinders with compatible flange and bore
• Profile: thin cutting disc for reduced kerf

How to use

Before mounting, inspect the wheel for visible damage and ensure the grinder is unplugged or battery removed. Fit the disc onto the grinder's spindle using the correct flange and tighten according to the tool manufacturer's torque guidance. When cutting, hold the grinder firmly with both hands, align the wheel with the cut line, and apply steady, moderate pressure—do not force the wheel. Allow the abrasive to do the work and maintain a consistent feed to avoid overheating. After use, let the disc come to a complete stop before setting the tool down.

Usage recommendations

Use appropriate personal protective equipment: safety goggles or face shield, hearing protection, gloves and suitable clothing. Ensure material is securely clamped and work in a well-ventilated area or use dust extraction. Do not use the disc for grinding, side-loading, or on materials other than those intended. Replace the wheel if cracked, chipped or excessively worn.