LED power supply Mojeledy GPV 48W 24V DC IP67 model 24V/2A/GPV

Mojeledy GPV 48W 24V DC IP67 model 24V/2A/GPV is a compact, sealed LED power supply that delivers a stable 24V DC output at up to 2 A. Built with an IP67-rated housing, this unit is designed for both indoor and outdoor installations where reliable, weather-resistant operation is required. The driver is suitable for powering 24V LED strips, modules and low-voltage lighting systems that demand constant-voltage supply and protected casing against dust and temporary immersion.

Advantages

The sealed IP67 enclosure provides protection against dust and water ingress, enabling installation in exposed or damp environments without additional enclosures. With a 48 W power rating and regulated 24V DC output, the supply ensures stable performance for long LED runs and minimizes voltage drop problems when paired with appropriate wiring. Its compact form factor simplifies integration into tight spaces, and the robust build supports consistent operation in varying temperature and humidity conditions.

Suitable for

• 24V LED strips for signage and architectural lighting
• Outdoor and garden LED fixtures requiring weatherproof power
• LED modules and low-voltage lighting in damp or dusty environments
• Indoor installations where a compact, sealed power supply is preferred

Key specifications

• Output voltage: 24V DC
• Maximum output current: 2 A
• Maximum power: 48 W
• Protection rating: IP67 (dust-tight and protected against temporary immersion)
• Operating environment: suitable for indoor and outdoor use
• Enclosure: sealed, compact housing designed for moisture resistance

How to use

Install the power supply on a stable surface or within a compatible mounting enclosure, ensuring adequate ventilation and access to the input power source. Connect the AC input according to local electrical regulations and the unit’s wiring diagram, then connect the 24V DC output to the LED load, observing correct polarity. Verify the cumulative LED load does not exceed 48 W and that cable sizes are appropriate to minimize voltage drop. After connections are secured, energize the unit and check output voltage and LED operation.

Usage recommendations

For reliable long-term performance, avoid continuous operation above the rated load and use adequately rated cables and waterproof connectors for outdoor runs. Place the driver where water cannot pool on the housing and allow for periodic inspection. For longer cable lengths, calculate voltage drop and, if necessary, increase conductor size or reduce run length to maintain consistent brightness.