Montana EX014H0211 Love Pink is a 400 ml aerosol spray paint formulated with fast-drying alkyd resins and high-quality pigments to deliver an even, pigmented finish on prepared surfaces. Designed within the Montana Hardcore (MTN) range, this spray offers a glossy appearance with improved drying speed and coverage compared with older formulations. It is suitable for creative projects, graffiti, crafts and surface marking when a durable, easy-to-apply aerosol paint is required. Use on primed wood, metal, masonry and many other properly prepared substrates according to substrate-specific instructions.
Advantages
EX014H0211 provides rapid drying and good film hardness while remaining flexible enough to resist cracking under normal use. The formula offers strong coverage and color retention with good resistance to sunlight, weather and UV exposure. It contains no lead or other heavy metals and is simple to apply and recoat when needed. The gloss finish remains stable and the product is formulated for ease of use in artistic and practical applications.
Suitable for
- Graffiti and street art on appropriate prepared surfaces
- Crafts, DIY and hobby projects on wood, metal and masonry
- Surface marking and color coding
- Touch-up and decorative coatings on primed substrates
Key specifications
- Volume: 400 ml aerosol can
- Binder type: Alkyd resin-based formulation
- Finish: Glossy (high gloss range per manufacturer data)
- Touch dry: approximately 15 minutes (ambient conditions)
- Fully dry: up to 24 hours depending on film thickness and conditions
- Typical dry film thickness: ~15 microns per coat
- Coverage: around 3 m² per 400 ml in continuous application
- Operating surface temperature: from +5°C to +50°C; ambient min. +8°C
- Maximum relative humidity for use: 85% R.H.
- Heat resistance of dried film: up to +100°C
How to use
Before use, shake the can vigorously for about one minute after hearing the mixing ball. Apply only to clean, dry surfaces; remove rust from corroded metal with a wire brush and use an appropriate anti-corrosion primer where necessary. For plastics and polyester, apply a suitable primer prior to topcoat. Apply the paint in thin, even coats rather than a single heavy coat — three thin layers give better results than one thick layer. Recoat with the same product after approximately 15 minutes under recommended conditions. After use, invert the can and spray briefly to clear the valve; replace a blocked nozzle with a new one. Do not use aerosol paint on equipment connected to mains electricity. Use in well-ventilated areas and follow local safety regulations for solvent-based aerosols.
Usage recommendations
For best results, prepare the substrate by cleaning, degreasing and priming where required. Maintain recommended temperatures and humidity during application. If overcoating with other solvent-based products, verify compatibility; pigment and binder properties mean this product is intended to be overcoated with Montana paints for reliable results. Allow full curing time before exposing the painted surface to heavy abrasion or high temperatures.
