MPL Power LED Driver GTPC-30-12-S — 30W, 12V DC, 2.5A, furniture-mounted

MPL Power LED Driver GTPC-30-12-S is a 30W constant-voltage power supply that provides 12V DC at up to 2.5A, designed for furniture-mounted installations. Its compact housing and fixed 12V output deliver stable low-voltage power for LED strips, modules and under-cabinet lighting. The unit is intended for integration into kitchen cabinets, display cases, shelving and other built-in furniture where a dedicated 12V source is required and space for installation is limited.

Advantages

The driver offers a compact form factor that fits into furniture cavities and mounting compartments. It produces a regulated 12V DC output with a rated power of 30W and a maximum current of 2.5A, ensuring consistent illumination without flicker for compatible LED loads. Designed for fixed-output applications, the device simplifies installation where a single, reliable low-voltage supply is needed. The construction is suitable for concealed mounting and provides straightforward electrical connections for LED strips and modules.

Suitable for

• Under-cabinet and under-shelf lighting in kitchens and retail displays
• Built-in furniture lighting such as wardrobes, display cases and shelving
• Low-voltage LED strip installations requiring a 12V DC constant-voltage supply

Key specifications

• Output voltage: 12V DC
• Output power: 30W
• Maximum output current: 2.5A
• Fixed constant-voltage output suitable for LED strips and modules
• Furniture-mounted design with compact housing for concealed installation

How to use

Mount the driver inside a furniture cavity or dedicated mounting compartment with adequate clearance for ventilation. Connect the input to a compatible mains supply following local electrical codes and ensure the device is switched off during installation. Attach the 12V DC output to the LED strip or module, observing correct polarity. Verify that the combined power consumption of connected LED elements does not exceed 30W and that the load current remains within the 2.5A limit. After connections are secured, power on and check the lighting for correct operation and absence of flicker.

Usage recommendations

Ensure the installation provides adequate ventilation and protection from moisture. Use appropriate cable sizes and connectors for both mains and low-voltage sides, and confirm that the total LED load stays below the rated 30W. For installations in furniture, avoid placing items directly against the driver to prevent overheating and allow periodic inspection for dust accumulation.