Power cable MPL Power POSAC-C13-EUL18 — IEC C13 to CEE 7/7, H03VV-F 3x0.75 mm², 1.8 m, 10 A, black

MPL Power POSAC-C13-EUL18 is a mains lead designed to connect equipment with an IEC C13 inlet to a CEE 7/7 (Schuko/Euro) wall socket. The cable uses H03VV-F construction with three conductors of 0.75 mm² each, providing a compact and flexible connection for devices that require up to 10 A at typical mains voltages. With a length of 1.8 m and a black finish, this power cable is intended for powering IT equipment, monitors, small appliances and POS terminals where a shorter, flexible mains lead is preferred.

Advantages

The cable combines a standard IEC C13 connector with a universally compatible CEE 7/7 plug, allowing use in many European installations. H03VV-F insulation provides flexibility for installations with limited space or where frequent repositioning is needed. Rated for 10 A, the lead is suitable for lower-power IT and office equipment without unnecessary bulk. The 1.8 m length balances reach and cable management while the black jacket offers a neutral appearance that integrates easily into office and retail environments.

Suitable for

• Powering desktop PCs, monitors and small network devices
• Connecting POS terminals and receipt printers in retail environments
• Supplying power to small kitchen or office appliances within the 10 A rating
• Temporary setups, exhibitions or demo stations where a compact mains lead is needed

Key specifications

• Connector A: IEC C13 inlet-compatible plug
• Connector B: CEE 7/7 (Schuko/Euro) mains plug
• Cable type: H03VV-F
• Conductors: 3 × 0.75 mm²
• Current rating: 10 A
• Length: 1.8 m
• Color: black

How to use

Confirm that the device to be powered accepts an IEC C13 connection and that its current draw does not exceed 10 A. Insert the IEC C13 connector into the device inlet until it is fully seated. Plug the CEE 7/7 plug into a compatible grounded mains socket. Route the cable to avoid creating trip hazards and keep it away from heat sources or sharp edges. Disconnect from the mains before performing any maintenance on the connected device.

Usage recommendations

Use this cable for indoor applications only; avoid exposure to outdoor weather conditions. For continuous high-load devices or where local regulations require higher-rated cabling, select a cable with an appropriate conductor size and current rating. Inspect the cable periodically for damage to the jacket or connectors and replace if any defects are found.