Power cable MPL Power POSAC-C13-EUL30 — IEC C13 to CEE 7/7, H03VV-F 3x1.0 mm², 3.0 m, 10 A, black

MPL Power POSAC-C13-EUL30 is a 3.0 m mains power cable with an IEC C13 appliance connector and a CEE 7/7 (Schuko) plug suitable for European wall sockets. The cable uses H03VV-F insulation and contains three 1.0 mm² conductors, providing a rated current of 10 A. It is designed to supply power to devices with IEC C13 inlets such as desktop PCs, monitors, printers and office peripherals where a reliable, standard mains connection is required.

Advantages

The cable combines a common IEC C13 connector with a CEE 7/7 plug for compatibility with most European outlets. H03VV-F insulation offers flexible handling and compact routing in office or home environments. With a 3.0 m length the cable allows extended reach from wall sockets to equipment racks or desks without the need for extension cords. The 1.0 mm² conductor cross-section and 10 A rating match typical power requirements of consumer and office electronics that use IEC C13 connectors.

Suitable for

• Desktop computers and workstations
• LCD/LED monitors and display units
• Printers, scanners and multifunction office devices
• Small UPS units and network equipment with IEC C13 inlet
• Home entertainment devices that accept IEC C13 connection

Key specifications

• Cable length: 3.0 m
• Connector A: IEC C13 appliance connector
• Connector B: CEE 7/7 (Schuko) mains plug
• Conductor: 3 cores × 1.0 mm²
• Insulation type: H03VV-F
• Rated current: 10 A
• Color: black

How to use

Verify that the device you intend to power has an IEC C13 inlet and that the rated current and voltage of the device are compatible with a 10 A mains cable. Insert the IEC C13 connector into the device inlet until it seats firmly. Plug the CEE 7/7 (Schuko) end into a properly grounded European wall socket. Route the cable to avoid sharp edges, heat sources and high-traffic walkways. Disconnect by removing the plug from the mains before servicing connected equipment.

Usage recommendations

For safe operation use the cable only within its rated current and in dry indoor environments. Avoid excessive bending near the connectors and do not use the cable if the insulation or conductors are damaged. For higher current demands or fixed installations consider a cable with larger conductor cross-section and corresponding safety approvals.