Spray Paint MTN 94 Fluorescent Yellow — MTN 400 ml aerosol fluorescent paint

MTN 94 Fluorescent Yellow is a 400 ml aerosol spray paint formulated to deliver a bright, high-visibility fluorescent yellow finish. Part of the MTN 94 range, this spray paint is designed for quick application and fast drying on a variety of common surfaces. It provides a vivid, attention-grabbing color for signage, marking, craft projects and street art where visibility and color intensity are important.

Advantages

The aerosol formulation ensures even coverage and smooth application with reduced dripping. Fast-drying properties allow for shorter recoat times and quicker project completion. The fluorescent pigment increases visibility in daylight and low-light conditions, while the solvent-based composition offers good adhesion to metal, wood and many plastics. The 400 ml can size balances portability with sufficient volume for small to medium projects.

Suitable for

• Outdoor and indoor signage and markings
• Street art, murals and stencil work
• Construction site and safety marking
• DIY and craft projects on wood, metal or plastic

Key specifications

• Volume: 400 ml aerosol can
• Color: fluorescent yellow high-visibility pigment
• Finish: opaque, bright fluorescent finish
• Drying: fast-drying formulation suitable for quick recoating
• Coverage: suitable for small to medium surface areas depending on application technique
• Compatibility: designed for use on metal, wood, plastic and similar surfaces

How to use

Shake the can vigorously for at least one minute after hearing the mixing ball. Spray from a distance of approximately 20–30 cm using smooth, even passes, keeping the can in motion to avoid drips and runs. Apply multiple thin coats rather than one heavy coat, allowing brief drying time between layers. For best adhesion, clean and degrease surfaces before painting and remove loose material or rust. Use in a well-ventilated area and follow local regulations for aerosol use and disposal.

Usage recommendations

For optimal results on metal or glossy plastic, use a suitable primer first. When working outdoors or in bright sunlight, test a small area to confirm color intensity and opacity. Wear protective gloves and eye protection; avoid inhalation by using respiratory protection if ventilation is limited.