LED strip MW Lighting TAŚMA LED-COB-12V/8W-NW/5M - 4000K, 12V, 8W/m, 5 m

MW Lighting TAŚMA LED-COB-12V/8W-NW/5M is a 5-metre continuous COB LED strip designed for low-voltage linear lighting. The strip operates at 12 V with a rated power of 8 W per metre and emits neutral white light at 4000 K. COB (Chip On Board) construction provides a smooth, even light output with reduced visible hotspots, making it suitable for applications that require consistent illumination along a linear run.

Advantages

The COB LED design delivers uniform light distribution and lower pixelation compared with discrete LED strips, improving visual comfort in close-view installations. Low-voltage operation at 12 V simplifies installation and increases safety in both residential and commercial settings. The 8 W per metre power rating provides a balance between brightness and energy efficiency, while the neutral white 4000 K color temperature supports accurate color rendering for general-purpose and task lighting.

Suitable for

• Under-cabinet and under-shelf illumination in kitchens and workspaces
• Linear accent lighting in living areas, corridors and retail displays
• Task lighting for worktops, benches and study areas
• Continuous cove and perimeter lighting where even illumination is required

Key specifications

• Length: 5 metres continuous strip
• Nominal voltage: 12 V DC
• Power consumption: 8 W per metre
• Color temperature: 4000 K (neutral white)
• Light source type: COB LED for uniform output

How to use

Cut the strip only at designated cutting marks and connect to a compatible 12 V DC power supply sized to handle the total wattage (total length multiplied by 8 W/m). Ensure correct polarity when wiring and use appropriate connectors or solder joints for secure electrical connections. Mount the strip on a clean, dry surface; if an adhesive backing is present, press firmly to ensure full contact. For improved heat dissipation and mechanical protection, install the strip into a compatible aluminium profile or channel when used for long runs or in enclosed installations.

Usage recommendations

Use a constant voltage 12 V driver with sufficient wattage plus a safety margin (recommended 10–20% extra). Avoid installing directly on surfaces that retain heat; provide ventilation or aluminium profiles for thermal management. For dimming, select a dimmable 12 V driver or compatible PWM dimmer and confirm the strip supports dimming. Follow local electrical codes and, if unsure, consult a qualified electrician for safe installation.