Detector Mount Nedis DTCTBR05 — metal mounting plate for detectors, diameter 39 mm, silver

Nedis Detector Mount DTCTBR05 is a compact silver metal mounting plate with a diameter of 39 mm designed to attach smoke, heat or motion detectors and compatible sensors. The plate offers a firm metal base for reliable fixation in both residential and commercial settings and is supplied with a self-adhesive backing that eliminates the need to drill holes in ceilings.

Advantages

The metal construction provides durable, stable support for detectors while the 39 mm diameter keeps the mount compact and unobtrusive. The self-adhesive backing allows quick, tool-free installation in less than a minute, avoiding dust and damage from drilling. The silver finish offers a neutral appearance that blends with most ceilings and fixtures.

Suitable for

• Mounting smoke detectors with compatible base diameter
• Fixing heat detectors or temperature sensors of matching size
• Installing small motion or presence sensors
• Temporary or permanent installations where drilling is undesirable

When it may not be suitable

This self-adhesive metal plate may not be appropriate for detectors with a base larger than 39 mm or for very heavy units that require robust mechanical fasteners. It may also be unsuitable on surfaces that are dusty, porous, damp, or painted with poorly adhering coatings where the adhesive cannot form a reliable bond.

Key specifications

• Material: metal
• Finish: silver
• Diameter: 39 mm (3.9 cm)
• Mounting method: self-adhesive backing
• Intended use: mounting of smoke, heat and motion detectors compatible with the plate size

How to use

Clean and dry the mounting surface thoroughly to remove dust, grease or loose paint. Peel off the protective film from the adhesive backing and press the plate firmly onto the ceiling or wall at the chosen location, holding pressure for several seconds to ensure contact. Attach the detector or sensor to the plate according to the detector manufacturer’s instructions and confirm the unit is securely fixed before use.

What to consider before purchase

• Check the detector or sensor base diameter to ensure compatibility with a 39 mm plate
• Assess the surface condition — adhesives bond best to clean, smooth, dry surfaces
• Consider the weight of the detector; very heavy devices may need mechanical fixing

Usage recommendations

For the most reliable adhesion, apply the plate at room temperature on a clean, non-porous surface and allow the adhesive to set for a short period before mounting the detector. If in doubt about weight or surface suitability, prefer mechanical mounting.