Hammer NEO tools 14-032 1 pc

The NEO tools 14-032 hammer is a pneumatic needle hammer designed for rust and weld removal on metal surfaces. The head contains 19 needles with a 3 mm diameter each, enabling precise impact and material removal. The tool operates at up to 5,000 strokes per minute, with a working pressure of 6.3 bar and an average air consumption of 85 l/min. Fitted with a 1/4" air connector and weighing 2.8 kg, this hammer is built for durability and consistent performance and is CE certified.

Advantages

The hammer’s 19×3 mm needle array concentrates impact energy for efficient chipping of rust and weld spatter while minimizing damage to surrounding metal. High stroke rate and rated working pressure provide steady removal performance during prolonged use. A moderate air consumption level balances power and compressor load, and the 1/4" connector ensures compatibility with common pneumatic fittings. The solid construction and CE certification attest to durability and safety compliance.

Suitable for

• Removing rust and scale from metal surfaces
• Cleaning weld seams and weld spatter
• Surface preparation before painting or coating
• Automotive bodywork, metal fabrication and repair shops
• General maintenance and demanding DIY metalwork

Key specifications

• Needle count and size: 19 needles, 3 mm diameter each
• Stroke rate: up to 5,000 strokes per minute
• Working pressure: 6.3 bar
• Average air consumption: 85 l/min
• Air connector: 1/4"
• Weight: 2.8 kg
• Certification: CE

How to use

Connect the hammer to a suitable compressed air source using the 1/4" connector and set the supply pressure to approximately 6.3 bar, verifying compressor capacity for the stated 85 l/min air consumption. Hold the tool firmly and apply it to the work surface at a shallow angle to avoid excessive penetration; move steadily along the area to remove rust or weld spatter. Allow short pauses during extended use to check the progress and to prevent overheating of the workpiece or tool. Follow all standard pneumatic tool safety practices, including secure workpiece clamping and safe body positioning.

Usage recommendations

Use appropriate personal protective equipment: eye protection, hearing protection and gloves. For best results on thicker corrosion or heavy weld spatter, perform multiple passes and combine the needle hammer with subsequent grinding or sanding steps to achieve a smooth finish. Ensure the compressor can maintain the required pressure and flow to avoid loss of performance.