Crosscut Saw No name 1000 mm model 28790

Crosscut Saw No name 1000 mm model 28790 is a manual crosscut saw designed for transverse cutting of wood and similar materials. The saw features a long 1000 mm cutting length that provides extended reach for straight crosscuts on boards, beams and panels. Intended for workshop and construction use, this tool focuses on accurate, controlled cuts across the grain where a long blade is required.

Advantages

The long 1000 mm blade increases cutting reach and reduces the need to reposition large workpieces, enabling more efficient crosscutting of wide boards and beams. A manual design offers direct control over cutting speed and pressure, which helps achieve straight, clean cuts when used with appropriate technique. The saw's construction is aimed at durability for repeated use in workshop or jobsite conditions.

Suitable for

• Crosscutting lumber, boards and planks across the grain
• Cutting beams and wide timber where longer reach is required
• Workshop tasks requiring straight, manual crosscuts
• On-site construction tasks where powered saws are impractical

Key specifications

• Cutting length: 1000 mm
• Type: manual crosscut saw for transverse cutting
• Intended materials: wood and similar timber-based materials
• Primary use: straight crosscuts across the grain

How to use

Secure the workpiece firmly using clamps or a stable bench to prevent movement. Mark the cut line clearly and position the saw so the teeth engage the waste side of the line. Use steady, even strokes, allowing the saw to do the cutting without excessive force; maintain blade alignment to keep cuts straight. Periodically check the cut progress and adjust hand pressure to avoid binding. After use, clean saw teeth of debris and store the tool in a dry place.

Usage recommendations

For best results, pair the saw with proper work-holding (bench vise or clamps) and mark reference lines before cutting. Use light lubrication or file maintenance if cutting becomes sluggish, and replace or sharpen the blade if teeth wear reduces cutting performance. Wear eye protection and gloves when cutting, and avoid using the saw on highly abrasive or metal materials.