PLA Silk Silver 1.75 mm 1 kg filament, No name — for FDM 3D printers

PLA Silk Silver 1.75 mm 1 kg filament from No name is a silk-finish polylactic acid filament designed for FDM/FFF 3D printers that use 1.75 mm extrusion. The material produces a glossy, metallic silver surface ideal for decorative parts, visual models and prototypes where a shiny, smooth finish is desired. This PLA formulation emphasizes ease of printing with low warping and reliable layer adhesion, making it suitable for a wide range of desktop 3D printing projects.

Advantages

The silk surface provides a reflective, metallic-like appearance without additional post-processing such as painting or plating. The filament exhibits consistent diameter and good feeding behavior on most consumer 1.75 mm extruders, reducing the need for frequent adjustments. Low warping and predictable cooling characteristics support dimensional accuracy for medium-complexity prints. The material is biodegradable under industrial composting conditions and is compatible with common PLA print settings.

Suitable for

• Decorative models and figurines with shiny surface finish
• Concept prototypes and visual mock-ups
• Cosmetic parts, trim pieces and display items
• Hobbyist projects, cosplay accessories and props
• Educational and demonstration prints

Key specifications

• Material: PLA (polylactic acid) with silk/metallic finish
• Filament diameter: 1.75 mm
• Net weight: 1 kg spool
• Finish: Glossy metallic silver (silk)
• Recommended nozzle diameter: 0.2–0.6 mm
• Typical printing temperature range: 190–220 °C (adjust per printer and hotend)
• Bed temperature: 0–60 °C (often printed successfully without heated bed; adhesion aid may be used)
• Good interlayer adhesion and low shrinkage

How to use

Load the filament into a 1.75 mm compatible extruder and purge until a consistent metallic flow appears. Start with mid-range PLA settings—nozzle temperature around 200 °C and a print speed of 40–60 mm/s—then adjust according to your specific printer, hotend and part geometry. Use layer heights between 0.1 and 0.3 mm to balance surface smoothness and print time; finer layers enhance the silk effect. For bed adhesion, a cooled bed or common adhesion aides such as glue stick, blue painter's tape or PEI surface can be used as needed. Allow printed parts to cool gradually to preserve dimensional stability and surface gloss.

Usage recommendations

To maximize the silk metallic appearance, use slower top-layer speeds and smaller layer heights; avoid excessive retraction and high extruder temperatures that can dull shine. Store the spool in a dry environment or sealed bag with desiccant to prevent moisture uptake and maintain consistent print quality.