LED strip No name LED120A-12V/28.8W-WW/5M, 5 m, 12 V, 28.8 W, 3000 K warm white

The 5-meter No name LED strip LED120A-12V/28.8W-WW/5M delivers continuous warm white illumination at a color temperature of 3000 K. This flexible LED tape operates from a 12 V supply and consumes 28.8 W over the full 5 m length, providing consistent light output for general lighting, accenting architectural features, or under-cabinet installations. The flexible format permits running along coving, shelves, or furniture edges and can be cut at designated points to fit custom lengths when used with compatible 12 V drivers and connectors.

Advantages

The LED strip provides uniform warm-white light suitable for residential and commercial indoor environments. Its low-voltage 12 V operation offers compatibility with common LED drivers and increases installation safety. With a full-length power rating of 28.8 W, the tape balances energy efficiency and luminous output for ambient and task-related lighting. The flexible tape construction simplifies installation in linear runs and allows tailoring lengths by cutting at marked intervals.

Suitable for

• Under-cabinet kitchen lighting
• Accent lighting for coves, shelves, or display cases
• Linear ambient lighting in living rooms, offices, or corridors
• Backlighting for furniture and interior millwork

Key specifications

• Length: 5 m
• Nominal voltage: 12 V DC
• Power consumption: 28.8 W (per 5 m)
• Color temperature: 3000 K (warm white)
• Form factor: flexible LED tape, cuttable at marked intervals

How to use

Plan the run and measure the required length, observing the marked cutting points on the tape. Connect the strip to a compatible 12 V LED driver with adequate power capacity for the total length; ensure polarity is correct. Mount the tape on a clean, dry surface using the adhesive backing or mechanical clips where necessary, keeping the strip free of sharp bends or tight radii to avoid damage. For longer runs or multiple segments, use appropriate connectors or wiring and consider voltage drop when sizing the driver and wiring.

Usage recommendations

Use a 12 V LED driver with at least 10–20% additional capacity above the strip’s rated 28.8 W to account for wiring losses and future expansion. Avoid exposure to direct moisture unless the tape is specified with an appropriate IP rating; insulate connections and use suitable mounting methods in humid environments. For consistent color and brightness across multiple runs, use strips from the same production batch and the same driver type.