Double-sided Foam Tape 25 mm x 1500 mm, adhesive foam mounting tape

Double-sided Foam Tape 25 mm x 1500 mm is a self-adhesive mounting tape made from closed-cell foam with adhesive layers on both faces. It is intended for bonding, sealing and mounting lightweight fixtures, trims, signs and panels to many common surfaces. The closed-cell structure provides gap filling and moderate vibration damping while the adhesive on both sides enables quick fixation without mechanical fasteners.

Advantages

The tape offers consistent thickness and compressibility for even contact on uneven substrates, and its double-sided adhesive construction simplifies installation by removing the need for screws or rivets in many applications. It delivers moderate shear strength suitable for lightweight mounting tasks, provides some weather resistance for outdoor use, and helps reduce noise and vibration where applied. The roll format (25 mm width, 1500 mm length) supports cutting to required lengths and minimizes material waste.

Suitable for

• Mounting lightweight trims, mouldings and decorative strips
• Attaching signs, nameplates and panels to flat or slightly curved surfaces
• Sealing joints and filling small gaps between materials
• Vibration damping and noise reduction in assemblies

When it may not be suitable

This double-sided foam tape is not designed for heavy structural bonding or for applications that require high shear or tensile strength. It may not perform reliably on oily, highly textured, dirty or damp substrates without proper surface preparation. For permanent exterior installations in extreme climates or where long-term UV exposure is severe, consider testing before prolonged use.

Key specifications

• Material: closed-cell foam carrier with pressure-sensitive adhesive on both sides
• Width: 25 mm
• Length: 1500 mm (roll)
• Core properties: compressible foam for gap filling and vibration damping
• Application temperature range: suitable for typical indoor and moderate outdoor conditions (test for extremes)

How to use

Clean and dry both bonding surfaces thoroughly, removing dust, grease and loose particles. Cut the tape to the required length, peel away one backing layer and press the exposed adhesive onto the first surface using firm, even pressure. Remove the remaining backing and align the second surface; press firmly across the bond line to ensure full contact. For best results, apply pressure for several seconds and allow adhesive to develop initial bond strength before subjecting the assembly to load. Avoid repositioning after full contact is made to preserve adhesive performance.

What to consider before purchase

• Intended load: suitable for lightweight mounting and not for heavy structural loads
• Surface condition: clean, dry and sufficiently smooth substrates give best adhesion
• Environmental exposure: test on-site for long-term outdoor or high-UV exposure
• Thickness and gap size: closed-cell foam fills small gaps but has limited compressibility for large irregularities

Usage recommendations

Store the roll in a cool, dry place before use. For optimal adhesion, apply tape at moderate temperatures and press firmly after placement. When bonding painted or delicate surfaces, test on a small area to check for paint compatibility and adhesive removal behavior.