Wooden Lever Clamp 200×110 mm – no name (unimet_1110003554741)

Wooden lever clamp 200×110 mm is a manually operated clamping tool designed for woodworking tasks that require temporary, secure holding of boards and assemblies. The clamp uses a lever mechanism and wooden jaws to apply pressure across a 200×110 mm contact area, enabling quick fixation for gluing, aligning, profiling and trimming operations. Its simple construction focuses on straightforward operation and minimal marking of softer workpiece surfaces.

Advantages

The lever mechanism delivers fast clamping and release with a single-handed action, reducing setup time. Wooden jaws provide a gentle contact surface that lowers the risk of surface damage or marring on furniture components and softwood parts. The compact 200×110 mm clamping capacity suits small to medium panels and assembly work, and the lightweight design makes the clamp easy to handle and position on benches or jigs.

Suitable for

• Gluing small panels and edge joints
• Holding parts during profiling and trimming
• Aligning edges for assembly of frames and cabinets
• Light carpentry and hobby woodworking

Key specifications

• Clamping area: approximately 200×110 mm
• Jaw material: wood (gentle contact surface)
• Operation: manual lever mechanism for quick clamp/release
• Suitable workpiece size: small to medium boards and components
• Design: compact, lightweight hand clamp

How to use

Position the wooden jaws around the workpiece so that the contact surfaces align with the area to be clamped. Engage the lever to apply pressure until the parts are held firmly; ensure even contact across the joint to avoid misalignment. Release the lever to remove the clamp after adhesive has cured or machining is complete. Inspect jaw surfaces regularly and replace or pad them if they show excessive wear or cause marks on finished surfaces.

Usage recommendations

For best results, use the clamp on flat, clean surfaces and avoid over-tightening to prevent compression marks on softwoods and veneered panels. Add protective pads if clamping finished surfaces or delicate materials. Combine multiple clamps for longer joints to ensure uniform pressure distribution during glue drying or assembly.