Door hinge 24x100 mm, No name — butt hinge, rolled barrel design, steel dimensions 24×100

Butt door hinge with a rolled barrel design, nominal size 24×100 mm, made of steel for general-purpose interior door and gate installations. The hinge provides a pivot connection between a door leaf and frame with compact 24 mm leaf width and 100 mm length, suitable for standard carpentry openings where a low-profile hinge is required. The steel construction offers basic mechanical strength appropriate for residential and light commercial interior doors.

Advantages

The rolled barrel design ensures smooth pivot action and simplified alignment during installation. A narrow 24 mm leaf width enables fitting on slim door stiles and frames while the 100 mm length gives adequate bearing surface for common door heights. Steel material provides reliable rigidity and dimensional stability under normal indoor conditions. The hinge’s simple geometry makes it compatible with standard mortise preparation and common hinge screws.

Suitable for

• Interior residential doors
• Light office or commercial interior doors
• Small gates and shutters with similar thickness
• Carpentry projects requiring compact hinges for narrow stiles

Key specifications

• Leaf width: 24 mm
• Overall length: 100 mm
• Material: steel
• Design: butt hinge with rolled barrel (pin) configuration
• Finish: raw or standard steel surface suitable for painting or additional coating
• Mounting type: mortise installation into door and frame

How to use

Mark hinge positions on the door and frame at the required heights, typically with two or three hinges per door depending on door height and load. Rout or chisel mortises matching the 24×100 mm leaf dimensions so the leaves sit flush with door and frame surfaces. Align leaves and insert the rolled barrel pin if removable, then fasten with appropriate-length screws that engage the substrate securely. Check door swing and adjust hinge placement if necessary to ensure smooth operation and correct clearance.

Usage recommendations

Use this steel 24×100 mm butt hinge on interior doors and light-duty applications. For increased corrosion resistance in humid or exterior environments, apply appropriate protective coating or select a corrosion-resistant hinge. Ensure screws are sized to match door material and that at least two hinges are used on standard interior doors; heavier or taller doors may require three hinges or higher-capacity hardware.