Grinding Disc Norton Clipper 250x32x32 mm 25A60KVS3 abrasive wheel for metal and masonry

Norton Clipper grinding disc 250x32x32 mm 25A60KVS3 is an abrasive wheel engineered for cutting and grinding tasks on metal and masonry. With a 250 mm diameter and 32 mm bore, this disc fits standard industrial grinders and angle grinders that accept that size. The A60 abrasive grade balances material removal rate and wheel life, making it suitable for general-purpose fabrication and construction work where consistent performance is needed.

Advantages

The disc combines a robust abrasive formulation with a reinforced structure to provide steady cutting and grinding without excessive wear. Its dimensions and bore size ensure stable mounting and reduced vibration during operation. The A60 grit offers a compromise between aggressive stock removal and acceptable longevity, helping maintain productivity on both metal and masonry surfaces.

Suitable for

• Cutting and grinding structural steel and metal components
• Shaping and removing mortar, concrete, and masonry materials
• Deburring and smoothing welded joints and edges
• General site and workshop grinding where 250 mm discs are specified

Key specifications

• Nominal diameter: 250 mm
• Bore diameter: 32 mm
• Abrasive specification: A60 grit
• Suitable for metal and masonry materials

How to use

Select a compatible grinder with appropriate guards and speed rating for a 250 mm abrasive disc. Mount the disc securely on the machine flange, ensuring the bore fits and the disc is correctly oriented. Observe the grinder manufacturer's recommended maximum rotational speed and do not exceed the disc’s speed rating. Use steady, controlled passes when cutting or grinding; avoid excessive lateral force that could stress the disc. Always allow the wheel to stop completely before setting the tool down and inspect the disc before each use for cracks or damage.

Usage recommendations

Wear suitable personal protective equipment including eye protection, hearing protection, gloves and respiratory protection for dust. Use appropriate fixtures or clamps to secure the workpiece. For masonry work, control dust with a vacuum or water suppression where practical. Replace the disc if it shows signs of wear, imbalance, or damage.