Cutting Disc Norton Clipper Starline Metal 125 x 22.23 x 1.0 mm

Norton Clipper Starline Metal 125 x 22.23 x 1.0 mm is a thin abrasive cutting disc designed for efficient metal cutting with standard angle grinders. The disc's 1.0 mm thickness is intended to provide fast, precise cuts while minimising material loss and heat generation. The 22.23 mm bore diameter is compatible with common grinder spindles used in workshop and on‑site metalworking tasks. This product is suitable for cutting steel, iron and other ferrous metals.

Advantages

The thin 1.0 mm cutting edge enables narrower kerf and faster cutting speed compared to thicker discs, reducing waste and improving productivity. Engineered abrasive composition and bonded construction deliver consistent cutting performance and reliable durability under typical working conditions. The standard 22.23 mm arbor hole ensures secure mounting on most angle grinders, and the disc is balanced to minimise vibration during use.

Suitable for

• Cutting steel rods, profiles and sheet metal
• Severing iron components and rebar
• On‑site metal repairs and workshop fabrication
• Precision cuts where minimal material loss is required

Key specifications

• Diameter: 125 mm
• Bore diameter: 22.23 mm
• Thickness: 1.0 mm
• Intended material: ferrous metals (steel, iron)
• Disc type: thin cutting disc for angle grinders

How to use

Mount the disc on an angle grinder with a matching 22.23 mm arbor and secure it according to the grinder manufacturer's instructions. Operate the grinder at the maximum peripheral speed recommended for the disc, keeping a steady feed and allowing the abrasive to cut without excessive force. Use short, controlled passes for thin material and continuous, even pressure for thicker sections. Allow the disc to cool between long cuts to prevent overheating and avoid twisting or side loads that can damage the disc.

Usage recommendations

Always wear appropriate personal protective equipment including safety goggles, face shield, gloves and hearing protection. Ensure the grinder's guard is in place and follow safety guidelines for cutting metal. Inspect the disc for cracks or damage before use and discard any compromised discs. Match disc speed to the grinder's rated RPM and do not exceed the disc's maximum operating speed.