Diamond Cutting Disc Norton Clipper 180x22.2 mm Continuous Standard Ceramic

Diamond Cutting Disc Norton Clipper 180x22.2 mm Continuous Standard Ceramic is a wheel designed for cutting ceramic materials and tiles. The disc has a 180 mm diameter and a 22.2 mm arbor hole and features a continuous rim profile that provides smooth, precise cuts and reduced chipping on glazed and porcelain surfaces. It is compatible with angle grinders and tile saws that accept a 22.2 mm mounting bore and is intended for renovation, tiling and finishing work.

Advantages

The continuous rim construction ensures a clean cut line with minimal chipping, while the diamond cutting edge maintains durability and cutting performance on hard ceramic and porcelain. Its standard segment profile is optimized for steady feed rates and controlled cutting depth, reducing the risk of surface damage. The disc’s balance and reinforced core improve stability during operation, resulting in more accurate cuts and longer tool life when used as recommended.

Suitable for

• Cutting ceramic floor and wall tiles
• Trimming porcelain and glazed tiles to size
• Renovation and tiling projects requiring smooth edges
• Use with angle grinders and tile cutting machines with 22.2 mm arbor

Key specifications

• Diameter: 180 mm
• Arbor bore: 22.2 mm
• Rim type: Continuous diamond rim
• Profile: Standard continuous segment for ceramic
• Material suitability: Ceramic, porcelain, glazed tiles

How to use

Fit the disc onto a compatible angle grinder or tile cutter with a 22.2 mm arbor, ensuring the machine is unplugged or the battery is removed before installation. Tighten the mounting flange securely and verify the disc is rated for the machine’s maximum RPM. Mark the cutting line on the tile, support the workpiece to prevent vibration, and start the tool at full speed. Use steady, even pressure and allow the diamond rim to do the cutting without forcing the disc. For best results, cut with water cooling if compatible with the tool to reduce dust and heat; otherwise follow dry-cutting guidelines and take regular breaks to avoid overheating.

Usage recommendations

Wear appropriate personal protective equipment including eye protection, hearing protection and a dust mask. Use clamps or supports to stabilize tiles and avoid binding. Do not exceed the disc’s maximum RPM and inspect the disc for damage before each use. For wet cutting, ensure the machine and disc are suitable for water use; for dry cutting, work in a well-ventilated area and control dust exposure.