Circular Saw Blade Norton Clipper 216 mm × 30 mm × 24T for Wood and Composites, ATB, negative hook

The Norton Clipper circular saw blade 216 mm × 30 mm × 24T is designed for controlled, accurate cutting of wood and composite materials. With a 216 mm outer diameter and a 30 mm bore, this blade features 24 teeth arranged in an ATB (Alternate Top Bevel) geometry and a negative hook angle that helps limit aggressive feed, reduce tear-out on laminates and veneered surfaces, and improve finished-edge quality on furniture components and panels.

Advantages

This blade combines a moderate tooth count with ATB tooth geometry to deliver clean cross-cuts and decent rip performance on a variety of wood species and composite boards. The negative hook angle provides safer, more controlled engagement with the workpiece, which is useful when cutting thin panels or pieces with fragile face layers. Its dimensions make it compatible with common table saws, mitre saws and sliding compound saws used in woodworking and cabinetry.

Suitable for

• Cross-cutting and finishing cuts in solid wood and engineered wood panels
• Cutting laminated boards, veneered panels and melamine-faced chipboard
• Use on table saws, mitre saws and sliding saws with a 30 mm arbor
• Work requiring reduced tear-out and controlled feed (furniture components, cabinetry)

When it may not be suitable

This blade is not optimised for high-speed industrial production where very high feed rates and maximum material removal are required; its negative hook and ATB geometry favour finish quality over aggressive cutting. It may also be less efficient for heavy ripping of large timbers where a dedicated ripping blade with a positive hook and fewer, larger teeth would be more appropriate.

Key specifications

• Outer diameter: 216 mm
• Arbor / bore diameter: 30 mm
• Number of teeth: 24
• Tooth geometry: Alternate Top Bevel (ATB)
• Hook angle: negative (designed for controlled feed and reduced pull-in)
• Primary applications: wood and composite materials (laminates, veneered panels)

How to use

Install the blade on a compatible saw with a 30 mm arbor following the machine manufacturer's safety instructions. Ensure the blade is correctly oriented so the teeth cut in the intended direction and that the saw's guard and splitter/riving knife are in place. For best results, set appropriate feed rate and blade speed for the material: slower, steady feed for thin or veneered panels to avoid tear-out, and moderately faster feed for general wood cutting. Use appropriate personal protective equipment (eye and hearing protection, dust extraction) and clamp or support workpieces to prevent movement.

What to consider before purchase

• Confirm your saw accepts a 216 mm blade with a 30 mm arbor or use a compatible reducer bushing if appropriate
• Assess whether finish-quality cuts (cross-cuts, veneered panels) are a priority over high-feed ripping tasks
• Verify the blade tooth count and ATB geometry match the materials you commonly cut

Usage recommendations

For best edge quality on laminated or veneered panels, support the cut face and use a sacrificial backing board when necessary; maintain sharp teeth and replace the blade if chipping or burning appears during cutting.