Circular Saw Blade Norton Clipper 160mm x 20mm x 48T for Wood & Composites ATB (1.8/1.2)

Norton Clipper Circular Saw Blade 160mm x 20mm x 48T is designed for cutting wood and composite materials. The blade features an alternate top bevel (ATB) tooth geometry with 48 teeth, offering a balance between cutting speed and edge finish. With a 160 mm diameter and 20 mm bore, and specified tooth thicknesses of 1.8 mm and 1.2 mm, this blade is suitable for both handheld and table circular saws used in panel processing, solid wood cutting and layered composite machining.

Advantages

The ATB tooth configuration provides clean crosscuts in wood and reduces splintering on veneered panels and laminated surfaces. The combination of 48 teeth and the specified tooth thicknesses improves chip clearance and reduces the risk of overheating during prolonged cuts. Compatibility with common 20 mm-arbor saws makes it a practical choice for workshop and on-site applications where a fine-toothed blade is needed for accurate, smooth cuts.

Suitable for

• Crosscutting and ripping of solid wood where a fine finish is required
• Cutting laminated panels, MDF and veneered boards with reduced splintering
• Working with plywood and multi-layer composite panels
• Use in handheld circular saws and table saws with a 20 mm arbor

When it may not be suitable

This blade may not be the best choice for heavy-duty ripping of large-dimension hardwoods where fewer, thicker teeth or a dedicated ripping blade offer faster material removal. It may also be less suitable for cutting metals, ceramic materials or abrasive non-wood products for which carbide-tipped blades specifically designed for those materials are required.

Key specifications

• Diameter: 160 mm
• Bore (arbor): 20 mm
• Number of teeth: 48
• Tooth geometry: Alternate Top Bevel (ATB)
• Tooth thicknesses: 1.8 mm and 1.2 mm
• Intended materials: wood and composite panels

How to use

Mount the blade securely on a compatible 20 mm arbor saw following the machine manufacturer’s instructions and ensure the blade direction matches the saw’s rotation. Check that the blade is clean, undamaged and properly tightened before operation. Adjust cutting speed and feed rate according to the material: use steady, even feed for panels and avoid forcing the blade. Wear appropriate personal protective equipment and use dust extraction where available. Inspect the blade periodically for wear and replace when teeth become dull or damaged.

What to consider before purchase

• Ensure your saw accepts a 160 mm diameter blade and has a 20 mm arbor
• Consider whether a 48-tooth ATB blade fits your need for a fine finish versus faster stock removal
• Confirm the blade is intended for the specific materials you cut (wood, veneered panels, composites)

Usage recommendations

For best results with wood and laminated panels use steady feed, appropriate blade speed, and dust extraction. When cutting veneered or laminated surfaces, consider scoring or using an auxiliary backing support to further reduce tear-out.