Circular Saw Blade Norton Clipper 160 mm x 20 mm, 60 teeth, for wood and composites, ATB (2.2 / 1.6)

The Norton Clipper circular saw blade 160 mm x 20 mm with 60 teeth is designed for cutting wood and composite materials. With a 160 mm diameter and 20 mm bore, this blade fits handheld and table saws that accept the matching arbor size. The ATB (Alternate Top Bevel) tooth geometry and mixed tooth thicknesses (2.2 mm and 1.6 mm) are intended to produce clean crosscuts and reduced tear-out on veneered, laminated or solid wood as well as many composite panels.

Advantages

This saw blade combines precise tooth geometry with a high tooth count to deliver smooth cutting performance on wood and composites. The ATB configuration helps provide fine edge quality on crosscuts and minimizes splintering on fiber-reinforced or laminated surfaces. The combination of thicker and thinner tooth widths supports stability and efficient material removal while maintaining a cleaner finish.

Suitable for

• Crosscutting solid wood and dimensional lumber
• Cutting veneered panels and laminated boards
• Trimming and sizing composite materials such as MDF, particleboard and some sandwich panels
• Use in handheld circular saws and table saws with a 20 mm arbor

When it may not be suitable

This blade is optimized for wood and common composite panels; it is not intended for cutting metals, masonry, or ceramic materials. For heavy ripping of large hardwood timbers or high-speed industrial production where faster material removal is the priority, a lower-tooth-count ripping blade would be more appropriate.

Key specifications

• Diameter: 160 mm
• Bore (arbor) diameter: 20 mm
• Number of teeth: 60
• Tooth geometry: ATB (Alternate Top Bevel)
• Tooth thicknesses: 2.2 mm and 1.6 mm

How to use

Install the blade on a compatible saw with a 20 mm arbor, ensuring the saw is disconnected from power before fitting. Check blade rotation direction matches the saw's arrow marking and tighten the arbor nut according to the tool manufacturer's torque recommendation. For the best finish on crosscuts and laminated surfaces, set the saw to the correct cutting speed and make steady, moderate feed-rate passes; avoid forcing the blade through material. Use appropriate push sticks, guides or fences to maintain control and follow all safety instructions for eye, hearing and hand protection.

What to consider before purchase

• Confirm your saw accepts a 160 mm blade and has a 20 mm arbor or use a correct reducer/adapter if needed
• Ensure a 60-tooth ATB configuration suits your typical work (clean crosscuts, veneered edges)
• Check compatibility with the specific composite materials you cut, as very abrasive or reinforced composites may wear carbide teeth faster

Usage recommendations

For clean, low-tear cuts on veneered panels and crosscuts, use a steady feed speed and keep the blade sharp; replace the blade if chipping or burning appears. When cutting abrasive composites, consider monitoring tooth wear and selecting a blade specifically rated for high-abrasion materials if frequent replacement is a concern.