Circular saw blade Norton Clipper 216 mm × 30 mm, 80 teeth for aluminium

The Norton Clipper circular saw blade 216 mm × 30 mm with 80 teeth is designed for precise cutting of aluminium and other non-ferrous metals. With a 216 mm diameter and a 30 mm bore it fits stationary and portable circular saws that accept a 30 mm arbor. The blade’s high tooth count provides fine, accurate cuts and helps minimise burrs and material deformation, making it suitable for fabrication and finishing tasks where clean edges are required.

Advantages

This blade delivers consistent, smooth cuts in aluminium due to its high tooth count and geometry optimised for non-ferrous metals. The 80-tooth configuration reduces vibration and chipping, producing a fine surface finish and minimising secondary deburring work. Its 30 mm bore ensures stable mounting on compatible saws, contributing to better cut accuracy and longer cutting life when used with appropriate speeds and feed rates.

Suitable for

• Cutting aluminium sheets, profiles and extrusions
• Fabrication of metalwork components requiring clean edges
• Fine trimming and finishing work on non-ferrous metal parts
• Use on stationary and portable circular saws with a 30 mm arbor

Key specifications

• Diameter: 216 mm
• Bore (arbor): 30 mm
• Teeth: 80
• Application: aluminium and non-ferrous metals
• Blade type: high-tooth count, fine-cut geometry

How to use

Install the blade onto a compatible circular saw following the saw manufacturer’s safety and mounting instructions, ensuring correct blade orientation and secure fastening on the 30 mm arbor. Use recommended cutting speeds for aluminium and maintain a steady feed rate to avoid overheating and excessive chip formation. Wear appropriate personal protective equipment and clamp workpieces firmly to prevent movement during cutting.

Usage recommendations

For best results, use cutting lubricant or air extraction to clear chips when cutting thick aluminium. Match blade RPM and feed rate to material thickness—slower feed and consistent speed produce cleaner edges. Inspect the blade for damage before use and replace if teeth are worn or chipped to maintain cut quality and safety.