Diamond Cutting Disc Norton Clipper EXTREME CERAMIC TURBO H10 230 x 25.4 mm

Diamond cutting disc Norton Clipper EXTREME CERAMIC TURBO H10 230 x 25.4 mm is a turbo-rim blade designed for powered saws to cut ceramic materials and other hard surfaces. The turbo rim geometry provides rapid cutting performance while maintaining controlled removal of chips, making it suitable for demanding construction and renovation tasks that require accuracy and consistent results. The disc is intended for wet or dry cutting where specified by the saw manufacturer and offers a balance of cutting speed and rim durability.

Advantages

The turbo rim profile accelerates cutting progress and improves debris evacuation to reduce heat buildup and clogging on ceramic and porcelain surfaces. Diamond bond and segment design deliver reliable edge life for repetitive cuts, while the 230 mm diameter and 25.4 mm bore match common power saws and angle grinders. The disc is engineered to give clean kerfs on tile and engineered ceramics with minimal chipping when used with appropriate equipment and technique.

Suitable for

• Cutting ceramic tiles and porcelain slabs
• Trimming engineered and technical ceramics
• On-site renovation and tiling work
• Fast rough cuts where controlled chip removal is required

Key specifications

• Diameter: 230 mm
• Bore (arbor) size: 25.4 mm
• Rim type: turbo diamond rim
• Recommended use: ceramic, porcelain, engineered ceramics
• Compatible with: power saws and angle grinders sized for 230 mm discs

How to use

Mount the disc on a properly rated power saw or angle grinder with the correct arbor adapter if required, ensuring the direction arrow on the disc aligns with the tool rotation. Secure the workpiece and, where applicable, use water or the manufacturer-recommended cooling method to limit heat and dust. Start the tool at no-load speed to verify balance, then proceed with steady, controlled cutting strokes; avoid excessive side pressure on the rim. Follow the power tool and accessory safety instructions, including using appropriate PPE and guards.

Usage recommendations

For best results on ceramic and porcelain, use steady feed rates and allow the diamond rim to do the cutting; intermittent cuts with water cooling extend blade life. Inspect the disc before each use for visible damage and replace if segments are cracked or the core is warped.