Acrylic Primer Novol PODKŁAD 1K Gray 500 ml – Novol NL-34402

Acrylic Primer Novol PODKŁAD 1K Gray 500 ml is a single-component acrylic primer formulated to improve adhesion and create a uniform base for subsequent paint layers. Intended for use in automotive and general repair work, this gray primer is suitable for properly prepared metal, wood and certain plastics. The product is packaged in a 500 ml container and is designed for easy application by brush or spray, supporting fast-drying small repairs and spot priming.

Advantages

This acrylic 1K primer provides good adhesion to prepared substrates, enhances the durability of topcoats and evens out surface irregularities prior to painting. Its single-component formulation eliminates the need for mixing with hardeners, simplifying application for small jobs. Fast drying and easy sanding allow for efficient workflow between primer and topcoat stages. The neutral gray tint helps with color control and coverage during subsequent painting.

Suitable for

• Spot repairs and small-area priming on automotive panels
• Preparation of metal surfaces before painting
• Priming of wooden components in repair tasks
• Use on some rigid plastics after proper surface preparation

Key specifications

• Type: single-component acrylic primer
• Color: gray
• Volume: 500 ml
• Application methods: brush, spray
• Drying: fast-drying formulation; suitable for sanding after recommended flash-off
• Suitable substrates: properly prepared metal, wood, some plastics

How to use

Ensure surfaces are clean, dry and free of rust, grease, wax and loose paint. Abrade glossy areas and remove dust before application. Shake or stir the container thoroughly before use. Apply evenly by brush or spray in thin coats, allowing recommended flash-off time between coats. After the primer has dried and cured as per manufacturer guidelines, sand as needed to achieve a smooth surface prior to applying the chosen topcoat.

Usage recommendations

Use appropriate personal protective equipment and work in a well-ventilated area. Test adhesion on small areas of plastics prior to full application. Follow drying and sanding intervals to ensure optimal adhesion and finish quality.