Spray Gun NUair PISTOLET LAKIERNICZY HVLP 1.4 mm with Top-Mounted Cup IMX14

NUair PISTOLET LAKIERNICZY HVLP 1.4 mm with Top-Mounted Cup IMX14 is a compact paint spray gun engineered for high-volume, low-pressure (HVLP) applications. With a 1.4 mm nozzle and an upward-facing paint cup, this tool is designed to deliver controlled atomization of lacquers, paints and primers. The configuration reduces overspray, helps conserve coating material and supports even film build for finishing work in automotive, furniture and general workshop environments.

Advantages

The HVLP design provides efficient transfer efficiency and finer atomization at lower air pressure, producing smoother surfaces and reduced material waste. The top-mounted cup offers straightforward paint refilling and good visibility of the spray pattern, while the 1.4 mm nozzle size balances flow rate and control for medium-viscosity coatings. Construction and ergonomics support stable handling during extended use, and the gun’s controls allow adjustment of fluid flow and air pattern for precision work.

Suitable for

• Automotive refinishing and small repair jobs
• Furniture lacquering and wood finishing
• Application of primers and topcoats in workshops
• Detail and touch-up work requiring controlled atomization

Key specifications

• Nozzle diameter: 1.4 mm suitable for medium-viscosity lacquers and paints
• Spray system: HVLP (High Volume Low Pressure) for improved transfer efficiency
• Paint cup position: top-mounted for easy refilling and visibility
• Adjustable settings: fluid control and air pattern adjustment for spray tuning
• Typical applications: lacquer, paint and primer application for automotive and furniture finishing

How to use

Prepare the coating by filtering and thinning according to the coating manufacturer's instructions to match a 1.4 mm nozzle. Connect the spray gun to a suitably regulated compressed air source set to the recommended HVLP pressure for the coating type. Adjust the air pattern and fluid flow controls to achieve the desired spray fan width and droplet size. Hold the gun perpendicular to the surface at a consistent distance, typically 15–25 cm, and apply overlapping passes with steady motion to obtain an even finish. Clean the gun thoroughly after use following the solvent and parts-cleaning procedure recommended for the specific coatings.

Usage recommendations

For best results, test spray on a disposable panel to fine-tune pressure and fluid settings before working on the final surface. Use appropriate personal protective equipment, ventilation and follow coating safety datasheets to minimize exposure. Regular maintenance, including nozzle and needle inspection and cleaning, will preserve spray consistency and prolong tool life.