Diamond Blade Distar Perfect 125 mm cutting disc, 1.5 mm thickness, 25 mm / 22.23 mm bore adapters

Distar Perfect diamond cutting blade, 125 mm diameter with a 1.5 mm cutting rim, designed for precise, low‑kerf cuts in hard construction materials. The blade is supplied with two bore adapters (25 mm and 22.23 mm) to fit a wide range of angle grinders and small saws. Its thin cutting rim and continuous segment profile offer controlled cutting performance for tile, masonry and natural stone where accuracy and minimal material removal matter.

Advantages

The 1.5 mm rim minimises material loss and reduces chipping on edges, delivering cleaner cuts compared with wider blades. The diamond bond and segment geometry are matched to hard abrasive materials, providing stable cut speed and good wear resistance for general construction use. Supplied adapters increase compatibility with common tool spindle sizes, allowing the same blade to be used on different grinders and power saws without additional mounting parts.

Suitable for

• Porcelain and ceramic tiles
• Masonry blocks and bricks
• Natural stone such as granite and marble (light finishing cuts)
• Thin cuts where a narrow kerf is required

Key specifications

• Diameter: 125 mm
• Cutting rim thickness: 1.5 mm
• Bore adapters included: 25 mm and 22.23 mm
• Segment type: continuous/thin rim suitable for finishing cuts
• Intended use: wet or dry cutting of hard construction materials (follow tool manufacturer recommendations)

How to use

Mount the blade on a compatible angle grinder or saw using the appropriate bore adapter for a secure fit. Inspect the blade for damage before use and follow the tool manufacturer's mounting and safety instructions. For best results on tile and stone, run the blade at the recommended operating speed and use steady, moderate feed pressure—do not force the blade. Use cooling (water) when recommended by the tool and material guidelines to extend blade life and reduce dust during cutting. Allow the blade to reach full speed before contacting the workpiece and complete cuts with a consistent motion to minimise chipping.

Usage recommendations

Use personal protective equipment including eye, hearing and respiratory protection. Choose wet cutting when working with dust‑sensitive materials or in enclosed spaces. Replace the blade if you notice excessive vibration, loss of cutting performance, or visible damage to the rim or segments.