Rotary Hammer Graphite 58G539, 1 pc(s)

The Graphite 58G539 rotary hammer is a 900 W SDS+ tool designed for heavy-duty drilling and chiseling in concrete, masonry and other construction materials. It combines percussion and rotary functions with an impact energy of 3.4 J and reaches up to 950 rpm in drilling mode and up to 5300 bpm in percussion mode. The tool accepts SDS+ bits and features a quick "click" bit-change system, spindle reversing, variable speed control and an on/off switch lock for continuous operation. Supplied accessories include additional drill bits, a drill chuck and chuck adapter, depth stop, rotating auxiliary handle, lubricant reservoir and a carrying case. A 3 m rubber-coated power cable and ergonomic non-slip main handle support prolonged and reliable use on site.

Advantages

The 900 W motor and 3.4 J impact energy deliver effective performance for drilling and chiseling in concrete and brick while maintaining stable operation under load. The SDS+ system with quick-click bit attachment and included chuck adapter increases versatility for different bit types. Ergonomic design elements — a non-slip main handle, rotating auxiliary handle and a moderate weight — improve handling and reduce fatigue during extended use. Built with durable components and a rubber-coated 3 m cable, the tool is suitable for indoor and outdoor jobsite conditions and meets CE safety standards.

Suitable for

• Drilling holes in reinforced concrete and masonry (up to 28 mm)
• Chiseling and light demolition work with percussion action
• Drilling metal (up to 13 mm) and wood (up to 30 mm) with appropriate bits
• Continuous operation tasks requiring switch lock and variable speed

Key specifications

• Power: 900 W
• Impact energy: 3.4 J
• Drilling speed: up to 950 rpm
• Percussion rate: up to 5300 bpm (strokes per minute)
• Maximum drilling diameters: concrete/brick up to 28 mm, steel up to 13 mm, wood up to 30 mm
• Chuck system: SDS+ with quick-click bit change; includes drill chuck and adapter
• Cable length and type: 3 m rubber-coated power cable
• Controls: variable speed trigger, spindle reverse, switch lock for continuous operation
• Included accessories: additional drill bits, depth stop, rotating auxiliary handle, lubricant reservoir, carrying case
• Compliance: CE certified

How to use

Fit an SDS+ bit or, using the included adapter, the required drill bit or chuck. Select the appropriate mode: rotary-only for drilling wood or metal, combined rotary-percussion for masonry and concrete, and percussion-only for chiseling where applicable. Set the variable speed according to material and bit size, press the spindle reverse if needed for bit removal, and engage the switch lock for continuous operation when drilling long holes. Use the depth stop to control hole depth and the rotating auxiliary handle for improved control and stability during drilling and chiseling.

Usage recommendations

Wear appropriate personal protective equipment (eye and hearing protection, dust mask and gloves) and ensure secure bit installation before operation. For best results in concrete, start at lower speed to position the bit, then increase speed and apply steady pressure to allow the hammer action to work effectively. Regularly check and maintain the chuck, lubricate moving parts as supplied, and store the tool in the carrying case to protect it from moisture and dust.