Outdoor light fitting ORNO 8080T-TRIO/MS/PL with microwave motion sensor, 75W, E27, IP44, IK10, transparent polycarbonate, cable glands

ORNO 8080T-TRIO/MS/PL is an outdoor light fitting designed for wall or ceiling mounting with an integrated microwave motion sensor for automatic on/off switching. The fitting accepts an E27 lamp up to 75W and combines IP44 ingress protection with IK10 impact resistance. The transparent polycarbonate housing provides visible illumination while cable glands ensure safe and sealed cable entry. This product is intended for use at building entrances, walkways and external utility areas where reliable detection and robust construction are required.

Advantages

The unit features microwave motion detection that covers a wide area and reacts to movement through non-contact sensing, reducing false triggers from temperature changes. IP44 protection offers resistance against splashing water and moderate dust exposure, while IK10 classification indicates high impact resistance for enhanced durability. The transparent polycarbonate body provides clear light transmission and resists outdoor environmental effects. Integrated cable glands simplify installation by providing a secure, sealed cable entry point.

Suitable for

• Building entrances and porch lighting
• External walkways and pathways
• Utility and service areas around residential or commercial properties
• Perimeter lighting where impact resistance is important

Key specifications

• Socket type: E27, compatible with incandescent, LED and compact fluorescent lamps up to 75W (use appropriate LED equivalents for lower power consumption)
• Motion sensor: microwave-type motion detector for automatic switching
• Ingress protection: IP44 against splashes and solid objects larger than 1 mm
• Impact resistance: IK10, suitable for locations subject to mechanical stress or vandalism
• Material: transparent polycarbonate housing for high light transmission and weather resistance
• Mounting: designed for wall or ceiling installation with integrated cable glands for sealed cable entry

How to use

Install the fitting on a suitable flat wall or ceiling surface following local electrical regulations and safety standards. Ensure power is switched off before making connections. Feed supply cables through the integrated cable glands and secure them; connect live, neutral and earth conductors to the corresponding terminals. Mount the unit firmly using appropriate fasteners for the substrate. Fit a suitable E27 lamp up to 75W or an LED equivalent, restore power and allow the microwave sensor to initialise. The sensor will automatically switch the light on when motion is detected within its range and off after the configured hold time.

Usage recommendations

Position the fitting to provide unobstructed coverage of the desired detection area and avoid aiming the sensor toward large heat sources (e.g., HVAC outlets) to minimise false triggers. Choose LED lamps with appropriate lumen output and colour temperature for the intended area to improve energy efficiency and visual comfort. Regularly inspect seals and cable glands for signs of wear and ensure the housing is kept clean to maintain sensor performance and light transmission.