Power cable ORNO for LED strip, 2x0.35 mm², 25 m

Power cable ORNO for LED strip, 2x0.35 mm², 25 m is a flexible two-conductor cable designed for low-voltage LED tape installations. With a cross-section of 0.35 mm² per conductor and a 25 metre length, this cable provides a practical solution for routing power from LED drivers or controllers to LED strips in indoor applications. The slim profile and suppleness make it suitable for running along ceilings, inside profiles, or concealed channels where a thin, flexible conductor is required.

Advantages

The ORNO 2x0.35 mm² power cable combines flexibility and compact size to facilitate neat LED installations. Its 25 m length reduces the need for splices and intermediate joins when supplying long runs of LED strip. The two-core construction simplifies connection to standard low-voltage LED drivers and controllers while maintaining stable power delivery for most indoor decorative and task lighting applications.

Подходит для

• Питание одноцветных и многосегментных светодиодных лент низкого напряжения
• Соединение трансформаторов/драйверов с LED-лентой внутри помещений
• Прокладка вдоль потолков, внутри алюминиевых профилей и кабель-каналов

Key specifications

• Conductor configuration: two cores
• Conductor cross-section: 0.35 mm² per core
• Length: 25 m
• Designed for low-voltage DC LED circuits
• Flexible, thin-profile cable suitable for concealed routing

How to use

Determine the required run length and route the cable from the LED driver or controller to the LED strip, avoiding sharp bends and heat sources. Strip insulation from the conductor ends and connect to the respective + and − terminals of the driver and LED strip, ensuring correct polarity. Secure the cable along its route with clips or within profiles to prevent strain on connections. If multiple runs are needed, plan feed points to minimize voltage drop and maintain stable light output.

Usage recommendations

For runs exceeding several metres or where high current is expected, check voltage drop and, if necessary, use thicker cabling or supply multiple feed points to preserve brightness and color consistency of the LED strip.