Motion sensor ORNO OR-CR-236/B 180° detection IP65 1200W black

ORNO OR-CR-236/B is a 180° motion sensor designed to control lighting and electrical loads up to 1200 W. Encased in a black housing with an IP65 rating, the device is protected against dust ingress and water jets, making it suitable for both indoor and outdoor installations where reliable presence detection and weather resistance are required. The wide detection angle allows monitoring of entrances, walkways, and exterior façades while the compact design enables inconspicuous mounting on walls or ceilings.

Advantages

The sensor combines a wide 180° detection field with a high switching capacity of up to 1200 W, enabling direct control of many lighting types without additional relays. An IP65-rated enclosure ensures durability in damp and dusty environments. The black finish provides a discreet appearance against many façades and fixtures. The device is intended for straightforward integration into standard electrical circuits to provide automatic on/off switching based on detected motion.

Suitable for

• Outdoor entrance and porch lighting
• Driveways and walkways
• Garage and external utility areas
• Indoor corridors and stairwells where weatherproofing is required

Key specifications

• Detection angle: 180°
• Maximum switching load: 1200 W
• Protection class: IP65 (dust tight and protected against water jets)
• Housing colour: black
• Mounting: wall or ceiling surface mounting

How to use

Install the motion sensor in a suitable location where the 180° detection field covers the desired area. Connect the device to the lighting or load circuit in accordance with local electrical regulations and with power disconnected. Adjust mounting height and orientation to avoid direct exposure to moving foliage or nearby heat sources that could cause false activations. After powering on, test the sensor by walking through the detection area to confirm switching behaviour and coverage.

Usage recommendations

For reliable operation, mount the sensor at a recommended height that matches manufacturer guidance for typical coverage and ensure that the unit is secured against moisture ingress at cable entry points. Avoid aiming the sensor directly at reflective surfaces or heat sources. When controlling inductive loads such as motors or transformers, verify compatibility with the sensor's switching capacity or use an appropriate intermediate relay.