LED reflector bulb Osram GU10 PAR16 2.6W (35W equiv) 4000K 230lm 36° pack of 5

Osram GU10 PAR16 LED reflector bulbs in a pack of 5 provide efficient, directional lighting for fixtures that accept GU10 bases. Each bulb consumes 2.6W while producing approximately 230 lumens, offering illumination comparable to a 35W incandescent lamp. The 4000K color temperature yields neutral cool-white light suitable for task and accent lighting. A 36° beam angle concentrates light for spot applications, and the bulbs are designed for direct connection to 230V mains.

Advantages

These Osram GU10 PAR16 LED bulbs combine low power consumption with a focused beam, delivering energy savings and reduced heat output compared with equivalent halogen or incandescent reflectors. The neutral 4000K tone renders colors accurately without appearing too warm or too cold, and the 36° beam angle supports targeted illumination for displays, work surfaces and accent lighting. Supplied as a pack of five, they offer consistent color and brightness across multiple fixtures.

Suitable for

• Spotlighting in kitchens, bathrooms and living areas
• Accent lighting for retail displays, galleries and shelving
• Office task lighting and directional ceiling fixtures
• Recessed downlights and track lighting that accept GU10 PAR16 bulbs

When it may not be suitable

These bulbs are designed specifically for GU10 sockets and direct 230V mains; they will not fit bayonet or screw-base fittings. Because the 36° beam produces a relatively narrow cone of light, they are less appropriate where very wide, diffuse room lighting is required. They are intended as replacements for 35W reflector lamps—if a warmer or much brighter general lighting is needed, choose another color temperature or higher lumen output.

Key specifications

• Light output: 230 lumens per bulb
• Power consumption: 2.6 watts per bulb
• Equivalent incandescent power: approximately 35 watts
• Color temperature: 4000 Kelvin (neutral/cool white)
• Beam angle: 36 degrees (directional spotlight)
• Base type: GU10, PAR16 form factor
• Supply voltage: 230 volts AC (mains)

How to use

Ensure the fixture is switched off and cool before replacing bulbs. Insert the GU10 base into the matching socket and twist to lock the reflector bulb in place. These bulbs connect directly to 230V mains and do not require an external driver. For consistent lighting, replace all bulbs in a multi-lamp fitting with bulbs of the same color temperature and type. Dispose of used bulbs according to local regulations for electronic waste.

What to consider before purchase

• Confirm fixture compatibility with GU10 base and PAR16 physical dimensions
• Verify 230V mains compatibility in your region
• Decide if 4000K neutral white matches the desired ambiance
• Assess whether a 36° beam angle provides the required coverage

Usage recommendations

For uniform appearance and color rendering, install the bulbs in sets when lighting open areas or display runs. Use the 36° beam for focused task lighting or to highlight objects; complement with wider-angle fixtures if more general illumination is needed.