LED luminaire Osram SWITCH BATTEN 90 cm, 10W, 4000K, 1300 lm, with switch

Osram SWITCH BATTEN is a 90 cm LED luminaire that delivers 1,300 lm at an input power of 10 W and a neutral white color temperature of 4,000 K. The fixture integrates a manual switch on the housing for easy on/off control and is intended for general indoor lighting applications such as corridors, utility rooms, kitchens and offices. Its compact linear form and low power consumption provide consistent, flicker-minimized light while reducing energy use compared with conventional fluorescent battens.

Advantages

The integrated switch simplifies operation without the need for additional wall switches or wiring modifications. With a luminous efficacy around 130 lm/W, the luminaire offers energy-efficient illumination and long operating life typical of LED technology. The neutral 4,000 K color temperature produces balanced, high-contrast light suitable for task areas. The slim housing enables straightforward surface mounting and the solid-state design reduces maintenance and the risk of glass breakage.

Suitable for

• Corridors and stairwells in residential or commercial buildings
• Utility rooms, basements and storage areas
• Kitchens and food prep areas where neutral white light is preferred
• Small offices, workshops and workbenches requiring even general lighting

Key specifications

• Length: 90 cm (linear batten format)
• Power consumption: 10 W
• Luminous flux: 1,300 lm
• Color temperature: 4,000 K (neutral white)
• Integrated on/off switch on the housing
• High luminous efficacy (~130 lm/W)
• Surface-mountable slim housing
• Solid-state LED light source with low maintenance

How to use

Mount the luminaire on a suitable flat surface following local electrical regulations and ensure the mains supply is switched off before installation. Connect the luminaire to the rated supply voltage using the provided terminal connections, secure it with the included mounting brackets or screws, and switch on the integrated toggle to operate the light. For retrofit replacement of fluorescent battens, remove the existing fixture and make compatible wiring connections; confirm polarity and earth continuity where applicable. Do not operate the luminaire in environments exceeding the recommended ambient temperature range or in direct outdoor exposure unless the product specification permits.

Usage recommendations

Position luminaires to provide even coverage and avoid placing them directly opposite highly reflective surfaces to reduce glare. For areas requiring frequent on/off switching, the integrated switch is suitable but consider grouping multiple fixtures on a common circuit for centralized control. Clean the housing with a dry or slightly damp cloth; avoid solvents and high-pressure washing. For prolonged service life, ensure adequate ventilation and avoid prolonged operation at temperatures above the stated limits.