OW workshop flexible cable 4x2.5 mm² 300/500V model OW4X2,5

OW workshop flexible cable 4x2.5 mm² 300/500V model OW4X2,5 is a four-core flexible electrical cable with a conductor cross-section of 2.5 mm² per core and a rated voltage of 300/500V. It is intended for general-purpose wiring in workshop environments, machinery connections and portable equipment where a 2.5 mm² conductor and moderate flexibility are required. The construction balances flexibility and mechanical strength to allow fixed and limited-flex installations for lighting circuits, socket outlets and small motor connections.

Advantages

The cable offers consistent electrical performance with conductors sized at 2.5 mm² suitable for typical branch circuits and equipment feeds. Its flexible design simplifies routing through confined spaces and around equipment compared with rigid cable types. Insulation and conductor construction are matched to the 300/500V rating to provide safe use in standard low-voltage applications. The four-core configuration allows live, neutral and earth plus an extra conductor for switched or control circuits without additional cabling.

Suitable for

• Workshop lighting circuits and general-purpose power outlets
• Connections to small machines and portable equipment
• Fixed installations with occasional movement or limited flexing
• Applications requiring a separate control or switched conductor

Key specifications

• Conductor cross-section: 2.5 mm² per core
• Number of cores: 4
• Rated voltage: 300/500V
• Construction: flexible multi-strand copper conductors with insulating sheath
• Typical uses: power distribution for lighting, sockets and small appliances

How to use

Install the cable according to local electrical regulations and wiring practices. Route the cable avoiding sharp edges and excessive bending radius; secure it at appropriate intervals using clamps or ties suitable for flexible cable. Strip insulation carefully to expose conductors for termination, and use connectors or terminals rated for 2.5 mm² conductors. Ensure correct identification and connection of live, neutral and earth conductors, and verify that the circuit protection (fuse or breaker) is appropriate for the conductor size and load.

Usage recommendations

Use this cable in environments where fixed mounting or limited movement is expected; avoid continuous flexing or dynamic applications. For permanent installations consult applicable wiring regulations and choose suitable protective conduits or trunking if mechanical protection is required.