Painto exterior masking tape 38 mm x 20 m – Painto 38020

Exterior masking tape Painto 38 mm x 20 m is a narrow adhesive tape designed for façade and outdoor painting tasks. The 38 mm width and 20 m roll length make it suitable for precise edge protection, temporary adhesion to common exterior substrates and securing masking lines on trims, window frames and joints during painting. The tape is intended to limit paint bleed and provide a clean separation between painted and non-painted areas on outdoor surfaces.

Advantages

The tape combines sufficient tack for temporary outdoor adhesion with an easy-peel backing that minimizes surface residue when removed within the recommended time. Its narrow width allows accurate masking along profiles and around trims, while the roll length reduces the need for frequent replacement on medium-sized jobs. The construction is formulated to resist short-term exposure to sun and moisture typical of exterior painting workflows.

Suitable for

• Masking window frames and sills during exterior painting
• Protecting trim, mouldings and facade details from paint overspray
• Securing protective films and drop cloths on outdoor surfaces
• Temporary fixing of lightweight materials during renovation works

Key specifications

• Width: 38 mm
• Length: 20 m per roll
• Intended use: exterior/façade masking
• Adhesion type: general-purpose outdoor masking adhesive
• Removability: designed for clean removal within typical short-term outdoor use

How to use

Before application, ensure the surface is dry, clean and free of dust, oils or loose particles. Unwind the tape from the roll and apply it firmly along the edge to be protected, smoothing by hand to ensure full contact. Overlap short sections if needed to follow profiles or corners. After painting, remove the tape by pulling it back on itself at a low angle and steady rate to reduce the risk of lifting fresh paint. Avoid stretching the tape during application to maintain accurate lines.

Usage recommendations

Apply within the manufacturer’s recommended temperature range where possible and remove within the product’s removable window to prevent adhesive transfer. For extended outdoor exposure or delicate surfaces, test a short length first to verify clean removal. Store rolls in a dry, cool place away from direct sunlight to preserve adhesive performance.