Masking Tape Painto 48 mm x 50 m blue, model BM55048

Painto masking tape 48 mm x 50 m blue (model BM55048) is a painter's tape designed to protect surfaces and produce clean paint edges. The 48 mm width and 50 m length provide a balance between coverage and maneuverability for general masking tasks on walls, wood, glass and metal. The tape is easy to apply and remove and is intended to leave minimal or no adhesive residue when peeled off after painting.

Advantages

The tape combines sufficient adhesion for secure temporary holding with clean removal to avoid surface damage. Its medium width makes it versatile for straight edges and trim work, while the blue color improves visibility and alignment during application. The paper backing conforms moderately well to slightly uneven surfaces and supports precise cutting by hand or with a dispenser.

Suitable for

• Masking edges and trim during interior and exterior painting
• Protecting glass, metal and wood from paint splatter
• Temporary holding of lightweight materials while fitting or trimming
• Creating sharp lines for decorative painting and striping

Key specifications

• Width: 48 mm
• Length: 50 m
• Color: blue
• Backing material: paper-based (painter's tape)
• Adhesive type: pressure-sensitive, formulated for clean removal
• Suitable surfaces: painted walls, wood, glass, metal

How to use

Ensure the surface is clean, dry and free of dust or grease before application. Unroll the required length, press the adhesive side firmly along the edge to be masked and smooth it down to prevent paint bleed. For long runs, overlap joints minimally and ensure consistent pressure. After painting, allow the paint to dry to the manufacturer's recommended tack or time and then remove the tape by pulling it back slowly at a low angle to minimize edge lifting and to achieve a crisp paint line.

Usage recommendations

Test the tape on a small, inconspicuous area when using on delicate or newly painted surfaces. Do not leave the tape in place for extended periods on exterior or high-temperature surfaces to avoid increased adhesion or residue; follow paint manufacturer drying times for optimal removal.