Click torque wrench Park Tool TW-6.2 Nm Mechanical 362 mm

The Park Tool TW-6.2 is a mechanical click torque wrench designed for precise torque measurement and application in Newton meters. At 362 mm length, this ratcheting, click-type tool is intended for higher torque settings encountered during bicycle maintenance and repair, such as bottom bracket and cassette lockring work. The TW-6.2 offers a reliable tactile click and a preset dial-adjust system, helping mechanics apply the correct torque consistently. A protective carrying case is included to keep the tool calibrated and protected between uses.

Advantages

The TW-6.2 provides a wide operating range suitable for heavier bicycle fasteners while maintaining fine adjustment capability with 0.25 Nm increments. Its ratcheting 3/8" drive and bidirectional reading support both left-hand and right-hand threads. The wrench is calibrated for accuracy to within ±4%, giving reproducible results for installation and service tasks. The presettable dial and audible click reduce the risk of over- or under-tightening sensitive components.

Suitable for

• Installing and removing bottom brackets that require higher torque
• Tightening or loosening cassette lockrings and freehub-related fasteners
• Maintenance of hubs, crank bolts and other bicycle components needing 10–60 Nm
• Professional bike workshops and serious home mechanics working with lightweight components

Key specifications

• Torque range: 10–60 Nm (88–530 in-lb)
• Adjustment resolution: 0.25 Nm increments
• Drive type: ratcheting 3/8" square drive
• Bidirectional measurement: registers both left-hand and right-hand threading
• Accuracy: calibrated to ±4%
• Length: 362 mm (36.2 cm / 14.25")
• Click-type mechanical torque release with dial-adjust preset
• Includes protective carrying case

How to use

Select the required torque value using the dial-adjust system and lock the setting if applicable. Attach compatible sockets to the 3/8" drive and position the wrench on the fastener. Apply steady rotational force in the intended tightening direction until the wrench emits a distinct click, indicating the preset torque has been reached. For left-hand threaded components, reverse the direction to allow the wrench to read and register torque correctly. After use, return the wrench to its lowest setting if recommended by the manufacturer and store it in the provided protective case to preserve calibration.

Usage recommendations

Use the TW-6.2 for bolts and lockrings that fall within its 10–60 Nm range; for lower torque requirements, consider a lower-range torque wrench. Periodically have the wrench recalibrated according to workshop practice if used frequently. Avoid using the tool as a breaker bar or applying shock loads, and store it in its case to maintain accuracy and prolong service life.